How do I change the ribbon on my Epson LX 300 II?

For LX-300+II users, make sure that the print head is in the middle of the printer. For LX-1170II users, make sure that the print head is in position at 10 cm (4 inches) from the left side. (If it is not, turn on the printer, and then, turn off the printer.) Then remove the ribbon cartridge from the printer.

How do I install Epson ribbon?

Place the plastic hooks on the ribbon cartridge into the slots of the printer. Then press the cartridge until it clicks into place. Hold both sides of the ribbon guide and pull it down until it is out of the cartridge. Put the ribbon guide at the bottom of the print head and push it up until it clicks.

How do I setup my Epson LX 300 printer?

Epson LX 300+II Printer’s Default Settings and chane…

1. Hold down the Tear Off (Font) button and then turn on the printer.
2. The printer enters Default Setting mode and prints instructions for selecting the language.
3. Press the Tear Off (Font) button.

How do I check my Epson LX 300 printer?

To run the test, turn on the printer while holding down the LF/FF button or Load/Eject button. Self test is printed in Draft characters when the LF/FF button is held, or in NLQ characters when the Load/Eject button is held. When using single-sheet paper, load paper in the printer.

How do I connect my Epson LX 300 printer to my Laptop?

Install Epson LX-300 on Windows 10

1. Connect printer to the computer.
2. Add printer manually option on printer and devices.
3. Choose from available list. Pick Epson, then either LX-300 or LX Series 1(80).
4. If they’re not available, click Windows Update and wait until done. It can take 15 minutes or more.
5. Print a test page.

How do I change font size on Epson LX 300?

Unfortunatelly you can not change the fontsize of the printer, but you can change the font. To do this hold Pause button for 3 seconds, then push Font button. Two lights will light on and then off and will show you the current settings of the font.

How do you self test a printer?

Microsoft Windows can also help you run printer tests. Click the Start button, click Devices and Printers and look for your Printer icon or link. Right-click on the printer you want to run a self-test for and select “Properties.” Click “Print Test Page” from the General tab to have the computer print out a test page.

How do I load paper into my Epson LX 350?

Turn on the printer. Make sure the printer cover is closed. Press the Load/Eject button to feed the paper to the loading position. When the printer receives data, it begins printing automatically.

What is ribbon cartridge?

In thermal transfer printing, ribbon cartridges are used, and these ribbon cartridges contain ink that resembles the consistency of crayon or wax. During the printing process, heat-sensitive paper is inserted into the machine and then squeezed between the printer’s thermal head and platen roller.