How do I buy a replacement lamp shade?

Your shade should be about two-thirds the height of your lamp base (give or take an inch).

1. Your shade should be about two-thirds the height of your lamp base (give or take an inch).
2. Proportion is the key – too tall and the effect will be top heavy, but too short and your lamp will look out of balance.

What is the glass part of a lamp called?

The Globe. The outer glass shell of the light bulb is called the globe.

What is a fitter on a glass globe?

Measuring glass shades & fitters The fitter is the outer diameter of the lip which is inserted into the fixture’s shade holder. The height of a glass shade is taken from the base of the fitter lip to the bottom of the shade.

How do I measure for a replacement lamp shade?

Lamp shade dimensions are typically measured as top x bottom x slant.

1. Top denotes the diameter (or width, if measuring a square lamp shade) of the top of the lamp shade.
2. Bottom denotes the diameter (or width) of the bottom of the lamp shade.
3. The slant is the length of the side of the lamp shade.

What are the two types of lamp shades?

There are basic lamp base types: round, square or angular and candlestick. In general, follow these designer rules for pairing a lamp shade with a base: Round bases: Pairs well with round or hexagonal shades. Square or angular bases: Pairs well with square or rectangular shades.

What are the pieces of a lamp called?

Bulb: Provide the light. Harp: Vertical shade support and shade attachment into the socket. Socket shell: light socket for bulb. Insulation sleeve: Secures socket shell to the switch and base.

What is the thing on top of a lamp called?

Finials are decorative caps that fit over shades at the top of a lamp. They help secure the lampshade in place and complete the lamp aesthetics. Finials come in a variety of colors, materials and shapes and are most often used with spider fitters.

Can you replace a glass lamp shade?

Types of Glass Lamp Shades You can replace your old shade with an exact replica, or you can take this opportunity to update your decor and add some excitement to your lighting. Glass shades come in a wide variety of shapes, colors and styles. As long as the dimensions are a match, you can choose any style you like.

Can you just replace the shade on a pendant light?

For most people, the process of changing a lamp shade is simple: just measure the fitter size, order a corresponding shade, unscrew the thumb screws holding the original shade in place, switch out the shades, then replace the thumb screws. That’s it!

What is a fitter on a light fixture?

The fitter is the portion of the shade holder through which the glass lampshade actually passes and makes physical contact with the lamp. Shade holders come in different fitter sizes and so do glass lampshades.

How do you determine what size harp to get for a lamp?

Selecting a shade for floor lamps with IES glass, harps, or cluster sockets. The bottom diameter of the floor lamp’s shade is related to the diameter of the lamp base. To determine the size, measure the bottom diameter of the floor lamp base. A 10” floor lamp base should have an 18” bottom diameter shade.

How do you paint a glass light globe?

Sponging glass paint on the globes gives them a slightly mottled look that gives the light a soft, almost diffused effect. Use two or more transparent shades of glass paint, and simply layer one on top of the other until you get the desired look. You don’t need to wait for the layers to dry, either,…

What is a glass globe?

A glass globe is a part or cover that covers that light available in the light kit. It is like a lamp shade that pays attention to the lighting fixture in a special manner. People start searching for Casablanca Fans replacement glass globes, when the globe falls while changing the bulb and it smashes on the floor. It is the best practice to remove the globe and put it on the table.

What is a lamp globe?

A plasma globe or plasma lamp (also called plasma ball, dome, sphere, tube or orb, depending on shape) is a clear glass container filled with a mixture of various noble gases with a high-voltage electrode in the center of the container.