Do traction bars help with traction?

The most important feature of tractions bars as the name states they do increase rear wheel traction. This is accomplished by the bar having an upward angle to the frame. When power is applied to the rear axle it will try to rotate in the opposite direction of the wheels.

Why do people put traction bars on trucks?

Traction bars are designed to prevent axle wrap and wheel hop. Traction bars make sure all the torque is applied to the wheels and helps keep you going straight down the road without slipping. Once you lift a truck you are amplifying the amount of axle wrap that the suspension allows.

Are traction bars good for towing?

When you tow heavy there is often terrible axle wrap. With the added weight and increases demand for power to move, the axle will rotate more then normal. Tractions bars will prevent this and keep your leafs in better condition.

Do traction bars limit travel?

Ordinary traction bars limit travel & over time, can prematurely wear out your Bronco. Our anti-wrap traction bar has a V-frame center link for strength and utilizes a specially designed shackle to eliminate axle wrap.

Do traction bars affect ride quality?

The only time a traction bar will effect the ride quality is when front snubber is in contact with the leaf spring or spring eye. Otherwise it is only acting as the lower mount.

What do recoil traction bars do?

Improve your truck’s traction while also limiting axle wrap with Recoil Traction Bars by BDS Suspension. Constructed from heavy duty steel tubing, Recoil Traction Bars are available for a wide range of applications and can be used on stock height or lifted trucks. …

Can you put traction bars on a 2wd?

Traction bars will do little but they will help prevent wheel hop if you have it. Honestly the best thing you can do is put weight in the bed. Get a camper shell. Remember you have a ton of torque going through a very light rear and the wheels will just spin.

How does a traction bar work?

Traction bars keep the axle from twisting backwards while it forces the drive wheels to turn forwards, completely eliminating leaf spring windup, and keeping the rear drive wheels forced down to the pavement for superior traction.

Can traction bars be too long?

The length of the traction bar will differ by application, but it’s important that the bar be long enough to cycle with the suspension. If the bar is too short it may bind the suspension or rear driveline. Generally, the longer you can make the bar the better.

Do traction bars limit Flex?

A Traction Bars purpose is to prevent the axle from wrapping (or basically twisting front to back) under heavy acceleration. They do not limit the flex of the suspension.

How effective are traction bars?

Believe it or not, traction bars can actually improve the braking ability of a truck. While acceleration without traction bars forces the pinion angle upward, heavy braking causes the opposite to occur (the pinion angle is forced downward). Traction bars keep the pinion angle the same no matter the circumstance.

Do traction bars help offroad?

A properly installed traction bar will prolong the life of your drivetrain and suspension components in addition to increasing traction both on and off road.