Can you use turntables with Traktor?

Connecting a turntable to the TRAKTOR S4 MK3 The TRAKTOR KONTROL S4 gives DJs the option of integrating turntables and using them to play vinyl or control the decks with timecode vinyl. The mixer channels on the S4 allow you to connect up to two Phono level audio devices.

How do I record Traktor Scratch?

Recording in Internal Mixer Mode in TRAKTOR

1. Set the Mixing Mode to Internal in the Output Routing tab of the TRAKTOR Preferences.
2. In the Mix Recorder Preferences, set the Source to Internal.
3. Open the Audio Recorder Panel in TRAKTOR’s Global Section.
4. You can now start your recording by hitting the Record button.

How do you calibrate Traktor Scratch?

HOW TO CALIBRATE

1. Open the scratch panel and switch to scope mode.
2. Drop the needle onto the timecode vinyl or start playback of the timecode CD.
3. Click the RST button. The calibration process only takes some seconds.
4. Check if the calibration circle is okay.

How to setup Traktor Scratch Pro for timecode control?

This setup guide explains how to set up TRAKTOR SCRATCH PRO for Timecode control from two external turntables or CD players when using a TRAKTOR KONTROL S4. Make sure that TRAKTOR SCRATCH PRO 2 is installed and activated on your computer (TRAKTOR PRO 2 does not support Timecode control as explained in this article ).

How to connect a Traktor Scratch Duo to a turntable?

Connect the output from your turntable to get two plugs labelled “Player TT/CD” of the multi core cable. Connect the two jacks labelled “Audio 4 DJ Input” to the two inputs of the Audio 4 DJ. Connect the two jacks labelled “Audio 4 DJ Output” to the two outputs of the Audio 4 DJ.

How do you set up a Traktor CD player?

If you are using Timecode CDs, connect the CD players to the CD inputs of Line 2 and 3 . Open TRAKTOR and select Start Setup Wizard from the Help menu. When asked if using an external controller, select Yes and click Next. Select Denon as the manufacturer and the DN-X1600 as the model. In the DECK LAYOUT SELECTION, choose 2 Track Decks (Scratch).

How to setup two Traktor Scratch Pro decks?

Run the Setup Wizard by clicking on the Setup Wizard button in the lower left corner of the TRAKTOR Preferences. In the DECK LAYOUT SELECTION, choose 2 Track Decks (Scratch). When the Setup Wizard is finished, open the TRAKTOR Preferences and go to Audio Setup. Make sure your audio interface is selected in the Audio Device menu. Input Configuration