Are there zero clearance wood stoves?

These prefabricated zero clearance wood burning fireplaces are built to the same heating standards as an air tight woodstove, meaning you get the same heating output with more aesthetic appeal. Wood burning zero clearance fireplaces all have glass doors to keep the cold out when not in use, and improve burn times.

What is a zero clearance wood stove insert?

Zero-clearance fireplaces are pre-fabricated fireplaces that are safe to install within inches of combustible materials like wood, sheet rock or paneling. This type of fireplace is suitable for all houses, including mobile homes. It’s an ideal option for homes that don’t already have a fireplace.

How do I reduce the clearance on my wood stove?

Using a piece of 24 gauge sheet metal installed on spacers 1″ from an existing wall and floor will reduce stove clearances by 66% – or from 36″ to 12″. The clearance reduction is usually measured from the rear of the stove to the original combustible wall, not to the sheet metal.

How much clearance do you need for stove pipe?

An unprotected stove pipe should be at least 18 inches from an unprotected wall or ceiling. And if the legs of the stove provide a clearance of less than 6 inches, the recommendation is to install 2 to 4 inches of hollow masonry with a sheet of 28-gauge sheet metal under it.

Can zero clearance fireplaces burn wood?

Wood Burning To answer what many of you may be wondering, yes, you can burn wood in a zero-clearance wood-burning fireplace. Wood is arguably the most popular fuel option among homeowners because it closely resembles a traditional masonry fire’s beauty and ambiance.

How do I know if my fireplace is zero clearance?

The most obvious way of identifying a zero clearance fireplace is the existence of black metal, either exposed on the face or inside the firebox (Fig. #6). Some fireplace manufacturers are doing a better job of hiding the metal and making fireplaces that look more like masonry (Fig. #7).

Do zero clearance fireplaces burn wood?

How far should wood stove be away from wall?

36 inches
Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.

Can you use cement board behind a wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

How much clearance do you need for triple wall stove pipe?

Inside the enclosure, building codes require a 2-inch clearance around the double- or triple-wall chimney pipe. While a double-wall class A chimney pipe is adequate for most installations, wood stoves installed in mobile homes are required to use a triple-wall chimney pipe.

How long does a zero clearance fireplace last?

The lifespan of a prefabricated fireplace is similar to other major appliances such as a range or refrigerator. Although they can last for as long as 20-30 years when well maintained, most masonry chimneys can last for generations.

What are the clearance requirements for a wood stove?

A wood stove needs to have at least 36 inches of clearance between an unprotected ceiling and the top of the stove. When installing a wood stove in front of a window, make sure the clearance is at least 36 inches from the glass to keep it from heating up and cracking or getting damaged.

How much clearance around a wood stove?

Stove manufacturer’s usually request a certain air gap around wood burning stoves, to non-combustible materials (not to be confused with combustible materials), left and right: usually between 2″ (50mm) and 6″ (150mm).

How can I Hide my wood stove pipe?

You can hide your wood stove pipe by routing it through the inside of your wall in order to keep it hidden. However, it is not as simple as boring a hole in your wall and routing the pipe up to the roof. You need to insulate it properly first by building a brick wall around it in order to prevent heat from seeping into the wall and damaging your paint or wallpaper.

How do I install a stove pipe?

Installing the Stove Pipe. 1. Work from inside, and fit the shorter, horizontal section of pipe through the wall until the inner end is about two inches from the face of the wall. Apply construction adhesive on the flat portion of the inside collar that fits at the wall, and slide the collar onto the pipe and against the wall.