Are Bose 901 speakers still made?

The pair of speaker I have for review are the most recent iteration of the 901 design, the Series VI. This pair was made back in 1987 when Bose speakers were still made in America. The design has not changed since then, and honestly it’s almost longer in the tooth than Klipsch Heritage speakers.

Do Bose 901 speakers need the equalizer?

Hello, the Bose 901 speakers are designed to work with and will not work appropriately without our 901 equalizer. The equalizer varies per model, please call us at 800-367-4008 so we can provide you with information on the proper version. equalizer, contact Bose, they will sell you one.

How many speakers are in a Bose 901?

two speaker units
The Bose 901 system, consisting of two speaker units and the equalizer, is priced at $476.

How do I setup my Bose 901?

Connect the amplifier INPUT of the Bose® 901® active equalizer to the PRE AMP OUT jacks of the receiver or amplifier. Connect right channel to right channel and left to left. 4. Connect the amplifier OUTPUT of the active equalizer to the MAIN AMP IN jacks on the receiver or amplifier.

Are Bose 901 still good?

Overall, the 901s are an excellent choice for just about any home stereo system. These speakers do an excellent job of rendering all types of music and the inline EQ controls make tweaking the sound profile very simple.

What year were Bose 901 speakers made?

1968
901. The “901” was released in 1968 and was a conventional design consisting of two floorstanding speakers. The system has nine drivers per channel, a separate amplifier unit, and an equalizer. Unlike other Bose speakers, the 901 Series was not intended to be used without their included 901 Active Equalizer.

How many watts are Bose 901 speakers?

The Bose 901 speakers will handle 10-450 W per channel, 8 ohms.

How many drivers are in the Bose 901?

The BOSE 901 Series III, with its high proportion of reflected sound, nine full-range drivers, and electronic active equalization, is in- stalled, connected, and operated differently than conventional loudspeakers. The detailed installation and placement instructions found in this manual are important.

How much does a Bose 901 speaker set cost?

For those of you unfamiliar with the 901s they’re Bose’s Flagship Stereo speaker set and they’ve been essentially the most expensive set of Bose Stereo speakers you could buy for the last 50+ years. They still sell them today, although they’re on “Series VI” now. New a set of Series VI retails for around $1400.

Can you remove dust cap from Bose 901?

Do not remove dustcap for Infinity Bullet woofers or Bose 901 or 802’s- use eye, ear and feel to center foam). Keep the blade horizontal so you will not cut the cone or voice coil leads. Slice center of the dustcap and work your way towards the outside edge and remove.

What’s the best way to repair a Bose speaker?

1. Remove speaker from the cabinet. Mark the wires and terminals (positive and negative) before you remove the component so you will remember how to correctly re-install it in the cabinet. The old foam can be messy and sticky so work on newspaper. (Bose 901 & 802 speakers should be repaired in the cabinet.) 2.

What was the rear grill on a Bose 901 made of?

The rear grill was simply attached with some tree-sap like glue, pulling it off by hand was a breeze. Once the Grills were off I could get a good look at the drivers, time had not been kind to the foam surrounds. All of them were rotted, and some had fallen off of the drivers completely.