How do you adjust the tension on a carefree slide awning?

Have your assistant hold and steady the support bar you’re not working with. Rotate the support bar one turn to tighten the spring. Repeat the process on the other support bar, and reattach the support bars to the RV body with the screws. If the support bars are free-standing, simply rotate them to tension the spring.

Where is the serial number on a carefree slide topper?

Part Number/Serial Number is located on the roller tube, inside of front cover and the underside of the slat.

How to maintain carefree ascent slide out cover?

Carefree of Colorado Service Manual LIDEOUT OVER TANDARD AINTENANCE Maintaining a Carefree Ascent slide-out cover is easy. Just follow these basic steps:  Periodically check that the fasteners are tight. Tighten if necessary.  Keep the awning fabric clean. ABRIC…

What do you need to know about carefree awnings?

Carefree’s exclusive focus is the design and manufacture of RV Awnings and RV Accessories, and this focus allows us to innovate and offer shade products that are unique and unsurpassed in terms of quality, value, performance and style. Carefree’s awnings are available in Electric or Manual configurations.

How do you put a slideout cover on an awning?

1. Align the mounting brackets with the inner edges of the top and side room flanges. Go to step 5. If using an existing awning rail: 2. Measure the distance from the inner flange edge to the center of the awning rail. 3. If the distance is within the range shown, align the mounting brackets with the inner edges of the top and side room flanges.

How to install carefree slideout cover for roller tube?

Place one (1) #10 x 2 PHSD screw through the fabric slot hole and polycord. The screw must be positioned to thread into the metal of the roller tube slot and the edge of the polycord.