Can I put wood against a baseboard heater?

The baseboard should be long enough to create the smallest possible gap between the end of the board and the heater end cap. Wood trim can actually touch the heater, although you’ll probably need a 1/4-inch clearance to get it in place.

Are wooden baseboard covers efficient?

Wood Covers However, it’s important to note that while wooden covers are safe, they aren’t considered the most efficient. They may be thermal insulative enough to absorb heat, but they more often retain that energy rather than freely distribute it throughout a room.

Can you cover heater with wood?

There are many ways to design an attractive wood cover. The metal fins of the heater can be concealed behind a panel, under a window seat or inside an nicely designed cover that is decorated with little panels, or faced with the same baseboard moulding as the rest of the room.

How do you clean a baseboard heater?

Dip a thick soft cloth into the detergent and wipe over the front and top of the baseboard heater. Get any built-up dirt out of crevices with a nylon bristle brush. Remove the front cover panel and wash it on both sides. Go over the inside fins vents and panels of the baseboard heater with the vacuum cleaner.

How do you remove an electric baseboard heater?

Steps To Remove Baseboard Heating System 1. Turn Off The System 2. Unscrew Your Heating System 3. Remove The Heater From The Wall 4. Expose The Wires 5. Cut The Wires 6. Add A Temporary Seal

How tall is a baseboard heater?

The standard height and width of our baseboard covers are: 11.75′ high and 6′ wide. This standard height and width will cover a baseboard heater that is 10.5′ high and 4′ wide.

How do you paint a baseboard heater?

Apply a coat of rust-inhibiting metal paint to the heater cover and to the paintable section of the heater element using a clean foam paintbrush. Apply paint to the end caps. Allow the paint to dry for the amount of time recommended by the manufacturer. Apply a second coat of paint.