What is the best media to clean brass?

When it comes to dry media you essentially have two options; corn cob and walnut. Corn cob is best for brass that is less tarnished and does not need too much polishing, whereas walnut is best for your dirtier, more tarnished brass.

What is brass cleaning media?

Crushed corn cob, crushed walnut shells, and stainless steel pins are the three types of media used to clean and polishing brass cartridges for reloading.

Can you reuse brass cleaning media?

Stainless steel pin media is one of the only medias for cleaning brass that will last indefinitely. However, this media can only be used in a rotary tumbler so if you have a vibratory tumbler to clean your brass then you cannot use stainless steel pin media.

What is the best brass cleaning media?

Go for stainless steel pins. Stainless steel pins are the most effective media for cleaning brass casings as they clean them inside more effectively than walnut shell and corncob. This media also does not require extra polish, but it can only be used in a rotary tumbler.

How do you make homemade brass cleaner?

Diluted vinegar solution can also be used to clean brass. It can be prepared by mixing one part of vinegar with ten parts of water. Take a bucket of water and add the required amount of vinegar into it to get the right proportion.

What is a good homemade brass cleaner?

Vinegar and salt can also make a good brass cleaner. The ratio is one tablespoon of salt and one cup of vinegar. Mix the two together and apply with an old toothbrush. For best results leave brass object in the solution for about an hour.

How do you make homemade brass polish?

Homemade Brass Polish Recipe. Ingredients: Directions: 1. Mix equal parts salt, white flour, and white vinegar to form a paste. 2. Rub the paste onto the tarnished brass. 3. Wait one hour, then rinse off the paste carefully. 4. Dry the brass with a soft cloth, and then buff to bring out its shine.