How do I record with Traktor Pro 2 with an external mixer?

Go to Preferences > Mix Recorder. Select External to configure the Mix Recorder for recording an external audio signal. In the menu External Input, select the channel assigned to the input channel of your audio interface.

How do you record a Traktor with a mixer?

Recording in Internal Mixer Mode in TRAKTOR

1. Set the Mixing Mode to Internal in the Output Routing tab of the TRAKTOR Preferences.
2. In the Mix Recorder Preferences, set the Source to Internal.
3. Open the Audio Recorder Panel in TRAKTOR’s Global Section.
4. You can now start your recording by hitting the Record button.

How do I connect decks to Traktor DJ 2?

Connect your turntables or CD players to the IN connectors of the audio interface. Run the Setup Wizard by clicking on the Setup Wizard button in the lower left corner of the TRAKTOR Preferences. In the DECK LAYOUT SELECTION, choose 2 Track Decks (Scratch).

How to set Traktor to External Mixing mode?

If you are using an external mixer, connect the outputs of your audio interface to the line inputs (not phono!) of your external mixer. Go to the Output Routing in the TRAKTOR Preferences. Set the Mixing Mode to External. The outputs will automatically be set in the correct order, which looks like this:

How can I use a Traktor mix recorder?

When using a mixer without an integrated audio interface you use an external soundcard to get the audio from Traktor into your mixer. To use the Traktor mix recorder, connect the record out of your mixer to a free input channel of your soundcard. If you are using a Traktor Audio 6 or Traktor Audio 10, you can use the Main Input of these soundcards.

How to use Traktor DJ with an external audio interface?

If your soundcard is being connected for the first time, you will see a panel with the layout of the audio interface describing the sound output setup. Press the gearwheel symbol to access the TRAKTOR DJ Preferences. Select the Audio Setup menu and check the output channels to be used as Master Outputs and Monitor Outputs.

How do you set up a Traktor CD player?

If you are using Timecode CDs, connect the CD players to the CD inputs of Line 2 and 3 . Open TRAKTOR and select Start Setup Wizard from the Help menu. When asked if using an external controller, select Yes and click Next. Select Denon as the manufacturer and the DN-X1600 as the model. In the DECK LAYOUT SELECTION, choose 2 Track Decks (Scratch).