Why did my adjustable bed stop working?

If your bed suddenly stops working, this usually means that the remote has lost its sync to the control box. What an easy fix! Remote sync instructions vary based on your model of bed. Depending on your model of bed, you will need to press and hold two buttons on your remote while pressing the blue reset button.

How do I fix my adjustable base?

If there is no light, verify that the input and power cords are properly connected. Unplug the base for 1 minute to reset the electronic components. Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is recommended).

How do you program a Rize remote control?

Step 1: Insert batteries into the Hand remote control (Use Two AA batteries – Included). Step 2: Make sure your adjustable bed is plugged into a working grounded outlet or surge protector. Step 3: Locate the control box on the underside of the Bed. hold down the learn button for 3 seconds.

How do you troubleshoot a faulty remote for an adjustable bed?

After checking for a disconnection, unplug and replug the remote and power supply, then check the batteries in the remote. When pressing the buttons on the remote fails to initiate the appropriate action, such as raising or lowering the sections, this is one common sign of a faulty remote for an adjustable bed.

What to do if your remote control breaks?

Look for a crack running along the side or edge of the remote. Most remotes consist of 2 plastic halves. By separating the halves, you can access the internal electronics. Wedge the knife into the crack, pry up the cover, and use your hands to pop it off. Handle the remote carefully to avoid scratching it.

What’s the best way to repair a remote?

Using a Keypad Repair Kit Purchase a keypad repair kit that can be used to fix the remote. A keypad repair kit comes with several brushes and a bottle of conductive paint. Wash the rubber buttons off with soap and water. Remotes either have individual buttons or a sheet of plastic with all the buttons attached.

How can I get a remote for my Bed?

If you need help ordering a remote or accessory you don’t see here, the best is to text us a picture of your old remote so we can look it up. If you don’t have your old remote or owners manual and cannot remember exactly what it looked like then send us a picture of the manufacturer and serial number under your base.