How much does borax raise pH?

The amount to add depends on the initial TA and pH level of your pool. At around 100 TA and 7.5 pH, the amount is about 8 ounces, so 0.5 pounds of borax can raise pH in a 10,000 gallons pool. That same amount of borax can increase a pH of 7.0 by about 0.04 and a pH of 8.0 by about 0.14.

How long does it take borax to raise pH?

After the first application of borax is dissolved, add the rest of the acid, followed by the rest of the borax. Brush again, and then keep the pump running for 24 to 48 hours. After 48 hours, test the water’s pH and add more acid if necessary to bring the pH down to the correct level.

How much borax do I put in a 20000 gallon pool?

For a 20,000 gal pool, about 60 lbs of Borax, and 4 gallons of acid.

How much borax do I need to raise the pH in my Pool?

As an example, if the TA level is 100, and you have a pool that holds 10,500 gallons, you would need 73.7 ounces of borax to raise the pH. That means adding about 20 Mule Team Borax in your pool since one box weighs 76 ounces. Make use of the water-chemistry calculator when computing the amount of borax to add to your pool.

Can you add borax without raising the alkalinity?

You can’t just add the Borax in a set amount without first getting the Alkalinity reading. You will see in the video that the lower the Alkalinity the less Borax you will need to raise the pH. The higher the Alkalinity the more Borax you will need.

What should the pH level of borax be?

On its own, borax has a pretty high pH; it’s actually about 9.5. If you’re adding large amounts of borax, you’ll run the risk of increasing your pH too much.

What do you need to know about 20 Mule Team Borax?

Natural Laundry Detergent Booster & Multi-Purpose Cleaner 20 Mule Team Borax™ is an all-natural powder used to help with cleaning, laundry, odor control, DIY crafting, and more! Where To Buy All Natural The only ingredient in Borax is a naturally occuring mineral called sodium tetraborate. It’s free of phosphates, chlorine and other chemicals.