How do I configure my Zyxel router?

Type http://192.168.1.1 on the browsers address bar and press/hit the ENTER/RETURN key on your keyboard. This will open the routers login screen. Type in the device password on the login screen to continue the setup. The default password for the Zyxel router is 1234.

How do I setup my Zyxel router as a repeater?

Answer

1. Basic settings on NWA1121-NI. In Configuration -> Network -> LAN -> IP, change the IP Address to 192.168.
2. Modify the Security and SSID profile. Set Security mode to WPA2-PSK and set the pre-shared key to 12345678.
3. Change operation mode for Repeater AP.
4. Change operation mode for Root AP.

How do I setup my Zyxel Wireless Bridge?

Setting the VMG as Modem Bridge Mode

1. Open an internet browser and access the web GUI of the VMG device (default is 192.168.1.1)
2. Enter your username and password, which are on default:
3. Navigate to Network Settings > Broadband Menu.
4. Edit the connection type you want to set into bridge mode.

How do I configure my Zyxel router as an access point?

Basic access-point configuration

1. Web Access. Open the web-interface by typing in the IP address of the access point (static or dynamic via DHCP)
2. Security List. Go to Configuration > Objects > AP Profile > SSID > Security List and click on the add button.
3. Edit Security Profile.
4. SSID List.
5. AP Management Page.
6. Broadcast SSID.

What does the nwa1121-ni-Zyxel wireless router do?

It extends the range of your existing wired network without additional wiring, providing easy network access to mobile users. The NWA1121-NI controls network access with MAC address filtering and RADIUS server authentication.

What do you need to know about nwa1121-ni?

Your NWA1121-NI is an IPv6 wireless AP (Access Point) that can function in several wireless modes. It extends the range of your existing wired network without additional wiring, providing easy network access to mobile users. The NWA1121-NI controls network access with MAC address filtering and RADIUS server authentication.

Why is universal repeater not set up on nwa1121-ni?

Why is it that the throughput of the NWA1123-NI with 2.4 GHz does not reach 300 Mbps when channel width is set to 20/40MHz? What is the procedure to set up universal repeater on NWA1121-NI?

How to set up a WAN port on zywall?

The initial setup wizard will appear when logging-in to the ZyWALL’s WebUI for the first time. Follow the prompts to setup the WAN port connection. Click Next to run the wizard setup for internet access. Note: If the “Installation Setup Wizard” does not appear when you login, run the wizard manually.