How do I find the IP address of my Axis camera?

To navigate to the camera’s Device Details page, select Devices in the navigation bar to the left in your Room Alert Account, and then select your camera from the device list. You may find the unit’s IP address listed under Local IP.

How do I assign an IP address to my Axis camera?

Start AXIS IP Utility. When the camera appears in the window, right-click it and select “Assign new IP address” and enter the IP address. Click the “Assign” button and follow the instructions.

How do I reset my Axis camera IP?

Resetting to the Factory Default Settings using the control button:

1. Disconnect the power cable or PoE injector of the camera.
2. Press and hold the ‘Control’ button on the camera while reapplying power.
3. Keep the ‘Control’ button pressed until the ‘Status’ indicator color of the camera changes to amber.

How to assign an IP address to an axis camera?

Assigning an IP address to the camera must be performed from a computer on the same network segment as the camera. AXIS IP Utility Version 1 is available as a free application that detects and assigns an IP to the Axis camera on Microsoft Windows PCs: AXIS IP Utility page.

How do I connect my axis camera to my PC?

Using a crossover network cable, connect the camera to your PC’s network card and power it up. Make sure that only one network connection is established – between PC and your Axis unit. (A crossover network cable is not need if a switch is used between Axis product and your PC or your PC supports Auto-MDIX).

What is the default user name for axis camera?

The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the Axis camera must be reset to the factory default settings (using the reset button). AXIS supports the Real-Time Streaming Protocol (RTSP) for the following camera models. Locate your camera model to find the specific RTSP URL details.

How can I change the IP address of my camera?

After that IP has successfully been assigned then you can change the IP address to what you need it to be in the product’s web interface. Check to make sure all the network connections from your computer and the camera are plugged in securely. Also check to see if the camera has a red network indicator light.