Users' questions

Why does my car make a scraping noise when I brake?

Why does my car make a scraping noise when I brake?

When brakes are making a scraping sound, it could indicate that a foreign body has gotten lodged between the pad and the rotor. In this case, the object needs to be removed. Similarly, squeaky brakes could simply mean they need some brake pad lube.

What does bad brakes sound like?

Squealing, Squeaking or Grinding Noises If you start hearing a high-pitched noise that stops when you apply the brakes that’s likely the sound of the brake pad wear indicators. They’re letting you know that your pads are worn out and need to be replaced before you get rotor damage, which can be an expensive fix.

What kind of noise does your car make when you apply the brakes?

Other Noises That May Not Be Related to Your Brakes 1 Grinding Noise When Brakes Are Applied Hearing a grinding noise when you apply your brakes is really like hitting a… 2 Thumping Noise From the Rear When Braking This brake issue is one that will annoy the heck out of the driver and suck… 3 Squeaking Noise While Breaking or Driving More

Why are my brake pads making a squeaking noise?

If your brake pads are used for quite a long time, the backing plates will gradually lose its material. This causes metal touching other metal, resulting in squeaking noises. Besides, the rotor can also rub the caliper and scrape its meal surface. Thus, if you do not replace the pads immediately, your brakes will be severely broken.

What should I do if I hear a thumping noise on my brakes?

Do this three to five times, while keeping a steady speed; the noise should disappear, or at least be 90% gone. Then drive the car at normal speeds and use the brakes the way you normally would. If the noise has not changed, you may have a different thumping noise than what I have described here in this article.

Why does my brake pad rattle when I put my foot on the brake?

The most common cause of this noise is the pads, and that’s ok. Brake pads can rattle sometimes due to heat expansion, especially if they were installed without anti-rattle shims. Keep in mind that this rattle should not be consistent and it should never happen while you have your foot on the brake pedal.