What is AKG D112 used for?

AKG D112 is a classic mic for kick drums that features large diaphragm, designed for high sound pressure and can handle quite a bit of vibrations. Typically, dynamic mics never boast having balanced frequency charts, especially when meant for kick recording where all you’d probably hope for is a decent low-end.

What type of microphone is a D112?

professional dynamic bass drum microphone
The D112 MkII professional dynamic bass drum microphone features a new integrated flexible mount, while retaining all the sonic strengths that have made it’s predecessor the industry-standard.

Does AKG D112 need phantom power?

As a dynamic mic, the D112 should ignore phantom power, although the service documentation suggests that the presence of phantom power will reveal short-circuited litz wires, which can get crushed in the housing if the mic is inexpertly reassembled.

Why is AKG D112 good for bass?

Due to its large diaphragm, the AKG d112 can deliver surprisingly accurate lower frequencies. It can also handle up to 160dB SPL with no distortion, which makes it a great choice for a live bass drum mic. If you put this in front of a kick drum or a bass amp, you’ll get the sound you’re looking for.

Is the AKG D112 MkII professional bass drum microphone?

The D112 MkII professional dynamic bass drum microphone features a new integrated flexible mount, while retaining all the sonic strengths that have made it’s predecessor the industry-standard.

What is the frequency response of the AKG D112?

If you look into the frequency response chart of this microphone, you will see a boost at around 100 Hz. And there will be a flat response at approximately around 3000 Hz with another boost, which is greatly different than the Shure Beta 57A which is a super-cardioid dynamic mic.

What’s the max SPL for AKG D112 MkII?

The mic has a frequency response of 20Hz – 17kHz, meaning that even the lowest of kick drum sub frequencies will be captured here, as well as all the top end you could need. It has a max Max. SPL for 0.5 % THD … > 160 calculated dB

Do you need phantom power for AKG D112?

The D112 is one of those microphones that I’ll lean on for years to come. It doesn’t require phantom power, either… which means you can plug it direct into most interfaces without needing to go through a separate preamp section. This simplicity means you can get it set up and sounding great, fast.