How many horsepower is a Goldwing?
How many horsepower is a Goldwing?
Honda Gold Wing
| 2018 Honda Gold Wing GL1800 | |
|---|---|
| Manufacturer | Honda Motor Co., Ltd |
| Bore / stroke | 73 mm × 73 mm (2.9 in × 2.9 in) |
| Compression ratio | 10.5:1 |
| Power | 93 kW (125 hp) @ 5,500 rpm (claimed) 73 kW (98 hp) @ 5,500 rpm (rear wheel) |
How much horsepower does a 2018 Goldwing have?
Rolled onto the Cycle World Dynojet 250i dyno, the Gold Wing’s 73.0 x 73.0mm bore-and-stroke engine with Unicam SOHC cylinder heads made a remarkable 102.51 pound-feet of torque at 1,370 rpm, with a stout 90.01 hp at 5,420 revs.
How much horsepower does a 2003 Honda Goldwing have?
119.65 HP
Water cooled, 1832cc, Boxer-6, SOHC
| Power: | 119.65 HP (88 kW) @ 5500 rpm |
|---|---|
| Torque: | 167 Nm (123.17 lb-ft) @ 4000 rpm |
| Final drive: | Shaft |
| Top speed: | 124.27 mph |
| Curb weight: | 892.9 lbs |
How much horsepower does a Honda GL1800 have?
The Honda GL1800 Gold Wing has 124.72 HP (91.0 kW)) @ 5500 RPM. How tall (seat height) is a Honda GL1800 Gold Wing? The Honda GL1800 Gold Wing seat height is 745 mm (29.3 inches) If adjustable, lowest setting. How many gears does a Honda GL1800 Gold Wing have?
How much horsepower does a cycleworld Goldwing have?
CYCLEWORLD claims: Peak horsepower of 97.85 at 5,500 rpm and a peak torque of 108.41 pound-feet at 1,210 rpm. I don’t know how to do the math, but being lighter the Goldwing still packs a punch… I’m sure that will be the next round of bashing the new wing…. Max are you out there????
Is there a way to increase the power of a Honda Goldwing?
The power comander is a good start and if you can have a good P/P on the heads and the power comander to dump a little more fuel then you will feel that for sure. While the heads are off might want to mill them a bit and increase compression.
How many horsepower does a Honda K1600 GTL have?
Scroll to the bottom to see the dyno chart. The numbers the Cycle World video gives are dyno readings (rear wheel). The numbers Honda advertises are to the crankshaft (approx. 125 for Hp and torque). All manufacturers do the same. An example is BMW K1600 GTL advertises 129 lb-ft of torque but dynos at about 112 to 114.