What is the explosive compound in C-4?
What is the explosive compound in C-4?
RDX (Cyclonite) is the primary compound responsible for the explosive nature of C4 and has been utilized due to its malleable nature, which allows it to be molded into any desired shape and redirect the direction of the resulting explosion [2].
How much explosive is in a C-4?
The explosive is a linear-shaped charge containing 45 pounds of composition B and 6 pounds of C-4.
What is the chemical formula for C-4 explosive?
2.2. Elemental Analysis
| No. | Explosive type | Formula |
|---|---|---|
| 1 | Comp C4 [21] | C4.66H8.04N6O5.99 |
| 2 | EPX-1 [20] | C7.88H12.36N4O12.59 |
| 3 | Semtex 10 [22] | C8.05H12.64N4O12.37 |
| 4 | Formex P1 [20] | C8.26H13.98N4O11.85 |
What happens if you eat C4?
Ingestion of the plastic explosive Composition-4 (C-4), whether intentional or unintentional, may result in neurologic, gastrointestinal, renal, and cardiac effects. Ingestion of C-4 commonly results in seizures, nausea, and vomiting. Seizures associated with C-4 toxicity respond to standard doses of benzodiazepines.
What kind of explosive is Composition C 4?
C-4 or Composition C-4 is a common variety of the plastic explosive family known as Composition C. A similar British plastic explosive, based on RDX but with different plasticizer than Composition C-4, is known as PE-4 (Plastic Explosive No. 4).
What are the advantages of using C4 explosive?
A major advantage of C-4 is that it can easily be molded into any desired shape to change the direction of the resulting explosion. C4 has high cutting ability. For example, the complete severing of a 14-inch deep I-beam takes between 1.5 and 2 lb of C4 when properly applied in thin sheets.
What’s the name of the British plastic explosive?
A similar British plastic explosive, also based on RDX but with different plasticizer than Composition C-4, is known as PE-4 (Plastic Explosive No. 4). C-4 is a member of the Composition C family of chemical explosives.
How long does it take to dry a C-4 explosive?
The kettle is tumbled to obtain a homogeneous mixture. This mixture is wet and must be dried after transfer to drying trays. Drying with forced air for 16 hours at 50 °C to 60 °C is recommended to eliminate excess moisture.