How do I change DD-WRT to original firmware?

If you have DD-WRT on your router you have to do the following:

1. Download the proper firmware from your manufacturer’s website.
2. Do a hard reset on the router (hold the reset button for 30 seconds, OR from the GUI, do a reset to factory defaults.

How do I remove DD-WRT from my Netgear router?

The DD-WRT router firmware may not be for everyone….How to Remove DD-WRT on Netgear

1. Download the Netgear firmware to your computer.
2. Connect your computer directly to the Netgear router with an Ethernet cable.
3. Click on the “Administration” tab and then click on the “Firmware Upgrades” sub-tab.

What is the default IP address for DD-WRT?

Access the GUI via the router IP address. The default for DD-WRT and many devices is [192.168. 1.1], or see [wikidevi.com Wikidevi].

How to revert from DD-WRT firmware to stock?

Go to DD-WRT forum and register an account if you don’t have one. There you will find revert files for V4 and V5. V4 on the second page and V5 on the 4th. Always flash firmware on cable, not via wireless. 2. OK, We’re back to stock TP-LINK firmware. User: admin, Pass: admin Loading…

Is the TP-Link WR741ND Firmware compatible with WLAN?

According to FCC-ID the TP-Link WR741ND has an Atheros Chipset, im unsure about the flashmem size – but a compatible Firmware for this Cheap Wlan router would be very nice. Posted: Thu Jun 17, 2010 4:08 Post subject: Re: TP-Link WR741ND Firmware.

How do you open the top of a tl-wr741nd?

Under each of the 4 rubber legs is a screw. Now unscrew the 4 screws. Unscrew the aerial, and then the nut and washer. Use a flat object such as the head of a flat screwdriver and gently try to pry open the top and bottom covers. Gently push upwards where the red arrows are and you can lift the top lid off.

Is the tl-wr741nd a lowcost wireless router?

TL-WR741ND is a lowcost (15€/25$) b/g/n wireless router, capable of running OpenWrt.