How much torque for Burris signature rings?

Adjustments

What is the torque spec for scope rings?

For a more precise torque setting follow the guidance supplied with the mounts, or use the following amounts: Ring cap screws should be set to 16 inch pounds (1.33 ft/lbs or 1.8 nm) Base screws should be set to 30 inch pounds (2.5 ft/lbs or 3.4 nm)

How tight should scope rings be?

A good rule of thumb is to have the rings as far apart as possible for your particular scope. Once the rings are in the correct location, remove scope, push forward and tighten each ring (the 1/2″ nut) finger tight, using your 65 INCH-POUND torque wrench tighten each nut.

Are Burris XTR rings good?

These rings work great. They center on the rail and add as much moa as you need. You can not only gain or loss up to 40 moa of elevation by choosing the right combo of inserts but you can also adjust for unusal ring/mount/barrel alignments.

What’s the torque on Burris XTR signature rings?

So, protip with these rings… the instructions that come with the Burris XTR Signature rings (the ones with the plastic inserts) specify a torque value for the screws that clamp the rings to the rail (40-70 in/lb), but there is no torque value specified for the ring clamp screws. I called Burris, and they said 20-25 in/lb.

How big are the Burris signature ring screws?

I decided to mount her up with the Burris Signature rings. I ALWAYS use a torque wrench when mounting bases and optics. So, my first call was to Burris tech support to get their torque specifications on the ring top screws with which they told me 20-25 in./lbs.

What kind of rings do Burris Optics use?

Burris Signature Rings set the industry standard for quality. They have a reputation for reliable performance in any weather or shooting circumstance. Available for all types of optics and bases. Solid steel rings, ideal for hunting. Pos-Align Inserts offer tremendous gripping power and durability and will not damage the scope finish.

Can a Burris 5-25 be mounted on a 34mm ring?

… Hey guys, just finished up what became a long, nightmare process using Burris’ 34mm Signature rings to mount my Burris XTRII 5-25. The reason for this post is so that hopefully, nobody else has to go through what I have.