What does RTD sheathing mean?
What does RTD sheathing mean?
Specifically, it refers to plywood that has been manufactured using a Resistance Temperature Detector. This is a device used during the manufacturing process that provides a highly accurate reading of the temperatures achieved during the bonding process.
What does RTD stand for in lumber?
They actually stand for the phrase “Resistance Temperature Detector”. This detector is a key piece in the development of RTD plywood. It provides a reading of the temperatures during the bonding process of each layer on this sheet of plywood.
Is 15 32 The same as half inch?
To combat this, the dado should be cut at 23/32 inch to ensure a proper fit….Thicknesses.
| NOMINAL VS. ACTUAL SIZES | |
|---|---|
| 1/4-inch | 11/32 |
| 1/2-inch | 15/32 |
| 5/8-inch | 19/32 |
| 3/4-inch | 23/32 |
What is the difference between RTD and BCX plywood?
ACX is better (the A side is without knots) than BCX. RTD stands for Resistance Temperature Detectors, a method toe ensure the plywood/adhesive is uniformly heated during bonding of the plies. AAX would be the highest grade, followed by ABX, BCX, CDX.
How big is 15 / 32 in.rtd sheathing at Home Depot?
Thicker than the 11/32 that is sold in store it made great cabinet shelving in lower cabinets. Was going to double it up and use as countertop but decided to use the 2x12x8 that I bought at the same time. Used it over 3/4″ ply when replacing the subfloor in my house.
How big is a standard APA sheathing sheathing?
Typical size is 4 ft x 8 ft, but other sizes may also be produced. Commonly square edge, but may be produced with tongue and groove edges. 2.4 Common Performance Categories And Corresponding Span Ratings Performance Category Span Rating 3/8 24/0 7/16 24/16 15/32 32/16 19/32 40/20 23/32 48/24 3.0 Installation
What do you need to know about RTD sheathing?
Exterior panels sometimes referred to as RTD sheathing, are designed to hold up to constant moisture. They are completely waterproof and are great for installing in places where you expect consistent exposure to moisture. This RTD sheathing is great for roofs and other outdoor applications. Understand what you’re buying
What do you need to know about RTD plywood?
Before you can decide which type of plywood is right for your project, you need to have a basic understanding of what RTD plywood actually is. In general, plywood is rated according to the number of defects or blemishes that you will find on the surface. It is most common to find plywood labeled with three letters.