What is the ideal stair rise and run?

5 Answers. The general rule (in the US) is 7-11 (a 7 inch rise and 11 inch run) (17.78cm-27.94cm). More exactly, no more than 7 3/4 inches (19.7cm) for the riser (vertical) and a minimum of 10 inches (25.4cm) for the tread (horizontal or step).

What is a normal stair rise?

Riser Heights In the United States, the step height standard should be between 7 or 7 ¾ inches at the most, and no less than 4 inches. You should follow other measurements if given by local building codes. In Canada, the maximum step riser height is 8 ¼ inches.

What is the most comfortable stair rise?

Rule one says that rise plus run (r+R) should equal 18 inches. Why? That’s what most people find to be a comfortable stride on most stairs. You can cheat a bit up or down, but below 17” and more than 19” will result in steps that require strides either too big or too small for most people.

How do you calculate stairs rise and run?

Calculating rise and run. To calculate the rise, or height, of a stairway, measure the height from one floor level to the next. Divide that total by 22 cm (8 11/16 inches) to see how many stairs you will need. Multiply the number of stairs by the expected width of each tread or step to determine the run, or the length of the stairway.

How to calculate rise and run for stairs?

Rise Run Stringer Stairs Calculator Measure the ‘total rise’ (from the surface of the upper floor to the surface of the lower floor). Enter this amount into Total Rise and set calculator for either inches or centimeters. Select a common rise-run combination from Simple or enter your own in Custom. Press the Calculate button and read the results in Exact Measurements

What is the average rise and run of stairs?

The general rule (in the US) is 7-11 (a 7 inch rise and 11 inch run) (17.78cm-27.94cm). More exactly, no more than 7 3/4 inches (19.7cm) for the riser (vertical) and a minimum of 10 inches (25.4cm) for the tread (horizontal or step). You can find some more information here as well on other stair-related dimensions.

What is the formula for rise over run?

The slope formula is sometimes called “rise over run.”. The simple way to think of the formula is: M=rise/run. M stands for slope. Your goal is to find the change in the height of the line over the horizontal distance of the line.