Is the most commonly used IP addressing scheme?

Correct Answer: Dynamic Host Configuration Protocol (DHCP) 18.

What is the most commonly used IP address?

Dynamic IP addresses
Dynamic IP addresses are the most common type of internet protocol addresses. Dynamic IP addresses are only active for a certain amount of time, after which they expire. The computer will either automatically request a new lease, or the computer may receive a new IP address.

What is the IP addressing scheme?

The Internet addressing scheme consists of Internet Protocol (IP) addresses and two special cases of IP addresses: broadcast addresses and loopback addresses. The Internet Protocol (IP) uses a 32-bit, two-part address field.

What is the most commonly used IP address and what it is used for?

An Internet Protocol address (IP address) is a numerical label such as 192.0. 2.1 that is connected to a computer network that uses the Internet Protocol for communication. An IP address serves two main functions: host or network interface identification and location addressing.

What do you need to know about IP addressing scheme?

1 IP Addressing Scheme. The IP header has 32 bits assigned for addressing a desired device on the network. An IP address is a unique identifier used to locate a device on the IP network. To make the system scalable, the address structure is subdivided into the network ID and the host ID.

Which is the most flexible class a IP address?

The same goes for class A addresses. This time, we have a lot more bits to borrow and this is probably the most flexible one in terms of subnetting. That is probably why one of the most popular private IP addresses or network addresses is the network 10, the class A private address.

What do the first three bytes of an IP address represent?

The classful paradigm tells us that the first three bytes of the address represent the network portion, whereas the last byte represents the host portion. Well, when subnetting, we want to create subnets out of the network; the network bytes are fixed and so we are going to need to use some of the bits dedicated to the host as subnet bits.

What does the IP address on a router mean?

The router is the component that will take them to or forward their packets to the remote destination. The router’s IP address is nothing more than the default gateway configured in each one of the machines. The function of the subnet mask is the same in the case of routers, but the routers are going to use the information differently.