Other

What is auto QoS trust?

What is auto QoS trust?

Basically auto qos voip trust is configured under interfaces connecting to routers or other switches so the classification will be considered as trusted and it is considered for ingress traffic only.

What does auto QoS trust DSCP do?

You can use the auto-QoS feature to simplify the deployment of QoS features. Auto-QoS determines the network design and enables QoS configurations so that the switch can prioritize different traffic flows.

What is Auto QoS VoIP cisco phone?

Auto-QoS VoIP Considerations Auto-QoS configures the switch for VoIP with Cisco IP Phones on nonrouted and routed ports. Auto-QoS also configures the switch for VoIP with devices running the Cisco SoftPhone application.

What is QoS VoIP?

What is VoIP Quality of Service? Quality of Service (QoS) is a method to prioritize network traffic going through a router to provide acceptable service to most users. Administrators put QoS in place to address audio quality issues. VoIP is susceptible to network congestion, resulting in echoes, lag, and dropped calls.

Where does auto QoS VoIP Trust interface command take place?

When you enter the auto qos voip trust interface configuration command on a port connected to the network interior, the switch trusts the CoS value for nonrouted ports or the DSCP value for routed ports in ingress packets (the assumption is that traffic has already been classified by other edge devices). Table 1.

What is the IPT system for Avaya phones?

The IPT system is Avaya CM with Avaya phones. The WAN network is a MPLS network. Ports are configured for access and voice vlan (no trunking), one vlan for voice, one for data (vlan 1 is disabled). We like to trust dscp settings from the Avaya phone (pretty simple to figure that out, just auto qos voip trust).

What does autoqos do for Avaya Communication Manager?

The AutoQoS features provide QoS service for the Avaya S87xx Series servers running Avaya Communication Manager software and the Avaya IP Telephones using a Cisco network infrastructure. These Application Notes also apply to other Avaya Servers running Avaya Communication Manager software. SZ; Reviewed: SPOC 10/15/2007

What are Avaya phones, Cisco switches and QoS?

Avaya Phones, Cisco Switches and QoS (MPLS network in between) All, I am implementing QoS on our MPLS network. Our environment exists of a mix of Cisco 3750 and 3560 switches. The IPT system is Avaya CM with Avaya phones. The WAN network is a MPLS network.