What is the minimum width for a urinal stall?

30 inches by 48 inches
Stall space: In front of the urinal, there needs to be an open area of 30 inches by 48 inches. Stall doors cannot open into this space. The partitions can be up to 12 inches off the floor and up to 60 inches tall. They should extend at least 6 inches past the front of the urinal.

What is the size of an ADA stall?

60” x 60”
In a corner handicap stalls require a minimum of 60” x 60” compartment and is required with a minimum door size of 32” and the maximum size and more common is the 36” door. Ambulatory compartment stalls are 35” – 37” width and have a 32” door which is handicap prepped. These compartments require 60” depth at a minimum.

Does a urinal need to be ADA compliant?

The ADA Standards require that unisex toilet rooms, where provided, have privacy latches and contain at most one lavatory, one water closet, and one urinal (or a second water closet) (§213.2. 1).

What are the dimensions of a urinal?

For starters, urinal partitions are usually 24 inches wide and between 42 and 48 inches tall. This standard size provides privacy and a nice, clean look for any restroom, but we also customize urinal partitions to fit any restroom design.

How big is a non ADA bathroom stall?

Non ADA Toilet Stalls A water closet, urinal, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition, vanity or other obstruction, or closer than 30 inches (762 mm) center to center between adjacent fixtures.

How big does a bathroom stall need to be?

Check out the bathroom stall dimensions and ADA sizes on our page: A water closet, urinal, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition, vanity or other obstruction, or closer than 30 inches (762 mm) center to center between adjacent fixtures.

How big does a bathroom have to be for Ada?

An Example of a Single ADA Bathroom Layout. Multiple Toilet Stall Layouts. For commercial bathrooms with multiple toilet stalls and handicap the rules change a little: In a corner handicap stalls require a minimum of 60” x 60” compartment and is required with a minimum door size of 32” and the maximum size and more common is the 36” door.

What’s the minimum clearance for a toilet stall?

Toilet stall doors, including door hardware, shall comply with 4.13. If toilet stall approach is from the latch side of the stall door, clearance between the door side of the stall and any obstruction may be reduced to a minimum of 42 in (1065 mm).