How do you clean CR plates?

As CR imaging plates are highly sensitive to water based cleaning fluids, we strongly recommend an ethanol-based plate cleaner. If possible, use a cleaner that is specially designed for CR imaging plates. This will help ensure longest possible service life. Pull out the moving plate from the cassette using extractor.

What are CR plates?

Sometimes called “film replacement technology”, Computed Radiography (CR) uses a flexible phosphor Imaging Plate (IP) to capture digital images instead of conventional photographic film.

How do you maintain the imaging plate scanner?

Cleaning Method: Place the plate with the black (non-phosphor) side down on a clean, dry, non-abrasive surface, such as a lint free cloth. Use lint-free cotton to wipe the imaging plates. Use a lint-free cloth dampened with ethanol anhydride to remove stains that do not come off easily.

What is difference between CR and DR?

Digital Radiography (DR) is the latest advancement in Radiography. DR technology quickly transfers images to the computer so you can view and diagnose without wait time. Computed Radiology (CR) is the digital replacement of X-ray film radiography. CR radiography uses phosphor image plates to create a digital image.

How does a CR plate work?

In computed radiography, when imaging plates are exposed to X-rays or gamma rays, the energy of the incoming radiation is stored in a special phosphor layer. When stimulated, the plate emits blue light with intensity proportional to the amount of radiation received during the exposure.

How do I clean my plate scanner imaging?

What is a CR doctor?

When it comes to the DR and CR abbreviations for debit and credit, a few theories exist. Another theory is that DR stands for “debit record” and CR stands for “credit record.” Finally, some believe the DR notation is short for “debtor” and CR is short for “creditor.”

What are the advantages of CR?

Some advantages of the CR system are: (1) the same plate can be used again and again; (2) it does not require a dark room and developing chemicals; (3) the produced image is digital and can be stored and manipulated electronically; (4) these images have greater dynamic range, wider exposure latitude and reduced patient …

What does CR and DR mean in banking?

An increase in liabilities or shareholders’ equity is a credit to the account, notated as “CR.” A decrease in liabilities is a debit, notated as “DR.” Using the double-entry method, bookkeepers enter each debit and credit in two places on a company’s balance sheet.

Is Dr better than CR?

DR improves workflow by producing higher quality images instantaneously while providing two to three times more dose efficiency than CR. The good and bad of CR is that it enables digital imaging with the traditional workflow of X-ray film.

What’s the best way to clean an imaging plate?

Imaging Plates should be handled carefully. For the best images, take care not to scratch the plates. Keep them dust-free. Use the following procedure to clean Plates: 1. Use lint-free, 100% cotton gauze (not cotton balls). Gently wipe the cotton gauze over the dry Plate surface. Wipe back and forth and then in a circular motion. 2.

What’s the best way to clean a plate?

Gently wipe the cotton gauze over the dry Plate surface. Wipe back and forth and then in a circular motion. 2. To clean any remaining stains, dampen the gauze in anhydrous ethanol or anhydrous isopropyl alcohol and wipe using the same motion as above. 3. Completely dry the surface by wiping with another piece of cotton gauze.

What should I use to clean Phosphor storage plates?

Cleaning Phosphor Storage Plates Imaging Plates should be handled carefully. For the best images, take care not to scratch the plates. Keep them dust-free. Use the following procedure to clean Plates: 1. Use lint-free, 100% cotton gauze (not cotton balls). Gently wipe the cotton gauze over the dry Plate surface.

How to clean and disinfect a PSP plate?

A 2% Gluteraldehyde solutions will not damage the PSP. After disinfection, clean the Plate and dry with a dust free cloth. If there is any evidence of deep scratches in the surface of the plate or nicks in the edges of the plate, do not emerse the plate. Cleaning the Plate Guides Wash the guides with soap and water and dry thoroughly.