How do you hang a curtain rod on metal?

Place a curtain rod bracket at the desired location at one end of the window frame. Use the machined holes in the bracket as guides and mark the locations were holes will be drilled with a felt-tip marker. Repeat this step to mark the locations for holes where a bracket attaches at the opposite end of the curtain rod.

What are the things that hold up curtain rods called?

Brackets, also called supports, are the hardware pieces that hold the rod. Curtain rods are always attached to the wall or ceiling with brackets.

What is mounting hardware for curtain rods?

The term drapery hardware refers to several items—typically including a drapery rod, wall brackets, curtain rings, finials or end caps, and decorative or standard traverse rails. These components allow your draperies to function well and provide a beautiful finishing touch to your installation.

Do curtain rod brackets come in different sizes?

Curtain rod brackets come in different sizes, colors and materials. The brackets you choose will largely depend on personal preference and the style of curtains you want to hang.

Can I drill into a metal window frame?

Drilling Through Metal Window Frame. This task may sound a little difficult as metal is extremely sturdy to drill, but with the right kind of drill bit and some additional tools, you can drill the needed holes and fix the brackets to the frame.

Do curtain rods need to be hang on studs?

Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts. TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first. You will know if there is wood!

Where do you hang brackets when hanging curtains?

Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.

What is a double curtain rod for?

Double curtain rods are used to give your windows a two-dimensional look; they allow you to combine two different colored curtains or fabric types. Two parallel rods, approximately 2-inches apart, are held in place by special mounting brackets.

What is an open curtain rod?

The most common type of traverse curtain rod is a split draw which is often called a center draw. These style rods open from the center outward and your drapery will stack on both the left side and right side of your window. Just think of a stage curtain at movies that opens to both sides to reveal the screen.

Who invented curtain rod support?

The curtain rod support was invented by William S. Grant on August 4, 1896. The invention of the curtain rod support came about four years after S.R. Scottron invented the curtain rod.Source:The Bl…

What are the parts of curtains?

The simplest curtains are two rectangular panels of fabric, lined or unlined, hemmed at the bottom and sides and hung from their upper edges using one of several heading or casing options. You can alter the look of these simple curtains by changing their length and width.