How do I install power Magic Pro?

BlackVue Power Magic Pro – Installation Guide

1. Set the voltage and timer switches.
2. Connect the red ACC(+) wire to a Switched fuse.
3. Connect the tellow BATT(+) wire to a Constant Power fuse.
4. Connect the black GND wire to a ground point.
5. Plug your dashcam’s power plug into the cigarette lighter socket on the wire harness.

What does Power Magic Pro do?

Power Magic Pro allows to configure both timer and voltage cut-off values. In addition to the timer, Power Magic Pro lets you set a voltage cut-off value. As soon as the voltage from your vehicle’s battery drops to the cut-off value, Power Magic Pro will stop powering your dashcam, thus saving your battery.

Do I need the power Magic Pro?

No. In this case, the Power Magic Pro takes the place of the installation kit, so you will only need to use a Power Magic Pro. To clarify, the Universal Dash Cam Quick Installation Kit is designed to connect to a switched fuse in your fuse box, which means that it will power on and off with your engine.

How to install the blackvue Power Magic Pro?

Plug the wire harness in and check that the Parking Mode Switch turns the LED on/off. Start your engine and check that the dashcam is powered when the Parking Mode Switch is both ON and OFF. Secure any excess wire and fix your Power Magic Pro in place using the supplied double-sided tape and/or screws.

What are the specs of Power Magic Pro?

Specifications Model Name Power Magic Pro Backup Battery Power restoration voltage (based on the Output current / Quiescent current 1A (Maximum: 2A) / Below 200μA Power cut-off voltage (based on the inpu 12V, 12.5V (±0.1V) / 22.8V, 23.2V (±0.1V software Power cut-off timer setting 6 hours – in

How can I use power magic on my computer?

If you move your mouse to the left or right side of the computer display, the program’s window will pop-up. You have several power commands, such as Stand By, Shut Down, Hibernate, Monitor Off, Mute/Unmute Speakers, along with other useful buttons as Screensaver, Log Off and Lock System, all being self explanatory.

What is the timer for power Magic Pro?

The timer can be set from 6 hours to infinite. In addition to the timer, Power Magic Pro lets you set a voltage cut-off value. As soon as the voltage from your vehicle’s battery drops to the cut-off value, Power Magic Pro will stop powering your dashcam, thus saving your battery.