How do I access my IP camera remotely?

How to view your IP camera remotely via a web browser

1. Find your camera’s IP address.
2. Open a web browser and type the IP address.
3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
4. After you change the port, you will need to reboot the camera in order to save the changes.

How do I access my EasyN IP camera from the Internet?

Go into the web interface (http://192.168.1.126:81 by default) Adjust the camera viewing angle to the desired position….However, to do it on the camera:

1. Go to the camera’s setup and select DDNS Service Settings.
2. Select the service provider from the list.
3. Enter the username password and host details.

How do I setup my EasyN IP camera?

Launch the EasyN App, Select“ +”on the app home screen, then select“ 3. Add camera manually” Select“ QR code” and scan QR code shown on the botton of camera or packing box Add and view the camera Page 8 Selec“tOK” to add the camera,The camera will show “Online”once connected. Click”Online” to view the camera.

How do I find my UID camera IP?

Note: To prepare for this configuration the UID must be documented for the camera. The number is usually located on a label on the bottom or the side of the camera. Be sure all the numbers and letters are correct otherwise it will be impossible to add the camera using this method.

How do I reset my Easyn IP camera?

For reset method: with the camera power on , you need to click reset button via toothpick or other sharp thing for 15s continuously , when you see the camera run by itself and the light is blinking , it works.

Can I connect my security camera to my phone?

You can link your smartphone or tablet to CCTV Security Pros recorders by simply scanning a QR code. Seamless Phone Connectivity – Sometimes, viewing security cameras live on your cell phone may cause network interference on your phone.

How do I connect to an IP camera?

Here is how:

1. Get your security camera charged. Use the power adapter to get the camera plugged-in and charged.
2. Use the network cable to connect to the camera and the computer.
3. Scan and find out the security camera’s IP address on the computer.
4. Change the computer’s IP address to the same network prefix of the IP camera.