How do you reset the belt light on a d4d?

How to reset timing belt light on 2015 toyota d4d

1. Cliford.
2. Ignition(key) off press odo button.
3. Hold odo switch ignition on for 5 seconds.
4. Switch ignition off release odo.
5. Press odo, switch ignition on and continue holding until light goes off.
6. Switch key off and check by starting vehicle.
7. The light should now be off .

When should the timing belt be changed on a Toyota Fortuner?

Conclusion: Toyota Fortuner Timing Chain Symptoms Most manufacturers will recommend changing the timing belt at 60k or 100k miles.

How do I check my timing belt?

The first thing to do is a visual inspection of the timing belt. Look for any contaminants that could eat away at the belt or cause it to slip. Also, look for cracks in the belt. If the belt has many cracks in it, this can indicate that the belt is old or has dried out.

How do you know your timing belt is going?

Symptoms of a Bad or Failing Timing Belt

• You Hear A Ticking Noise Coming From The Engine.
• Your Car’s Engine Won’t Turn Over.
• You Notice An Oil Leak Near The Motor.
• You Experience Exhaust Issues.
• Your Revs Start Acting Up.

How do you turn off the timing belt light on a 80 series Landcruiser?

In your instument cluster there is reset button. There is a rubber plug that you will need to pull out. The reset button is behind it. It should be right next to the trip odometer reset.

How much does it cost to change a timing belt on a Toyota Hilux?

Timing belt replacement from $623.

What are signs of a bad timing belt?

5 Signs and Symptoms of a Failing Timing Belt

• Dropping Oil Pressure. One of the worst things that can happen if your belt fails is for the oil pressure in the engine to drop.
• Misfiring. Misfiring is a common occurrence with failing timing belts.
• Rough Idling.
• Smoke.
• Broken Pistons or Valves.

How to reset timing belt light on Toyota Fortuner 2007?

Below is a quick guide on how to reset a timing belt light on Toyota fortuner 2007 model. Make sure all doors, hood and trunk are closed. Insert your your key, but don’t turn yet. Press and hold the ODO reset button in front of the cluster. Quickly turn on the ignition while you keep holding the ODO reset button for 10 seconds.

Is there a way to reset the timing belt?

Don’t ignore the timing belt warning …. it’s there for good reason! Changing the belt timeously can save you big bucks. The dealers of course are smoking something strange as usual with those over inflated prices, so the trick to reset the light is a good one, but only reset it after you’ve had someone replace the belt or you’ve done it yourself.

Can you reset the belt on a Hilux?

Changing the belt timeously can save you big bucks. The dealers of course are smoking something strange as usual with those over inflated prices, so the trick to reset the light is a good one, but only reset it after you’ve had someone replace the belt or you’ve done it yourself. When your road comes to an end …… you need a HILUX!.

When does the T Belt Light Come On?

The T-Belt light will come on just past 150 000 km, whether you replaced the belt or not. 1. Switch ignition on and select “odo” 2. Switch ignition off