Articles

How do I get my MC Licence in NSW?

How do I get my MC Licence in NSW?

MC Licence NSW Requirements

  1. Have held an HR or HC licence or equivalent for at least one year.
  2. Pass an MC knowledge test.
  3. Pass an eyesight test.
  4. Successfully complete HVCBA. If you hold an HR licence, you’ll need to pass an HC assessment before you can start MC training.
  5. Pass a medical examination.

What is the difference between HC and MC license?

Stepping up from rigids, a Heavy Combination (HC) licence puts you in heavy articulated vehicles with a truck and trailer over 9 tonne or a semi-trailer with one trailer. At the top end of heavy vehicle licensing the Multi-Combination (MC) licence means you can operate B Doubles, set and road trains.

What size truck can I drive on a car Licence NSW?

Class LR Licence vehicles in NSW include: – Any motor vehicle more than 4.5 tonnes GVM but no more than 8 tonnes GVM. – Any towed trailer must not weigh more than 9 tonnes GVM. – Any vehicle with a GVM of no more than 8 tonnes which carries more than 12 adults including the driver.

What is condition B on NSW license?

About the Licence A condition ‘B’ is placed on any heavy vehicle licence that is obtained in a vehicle with automatic or synchromesh transmission. It prevents the driving heavy vehicles with constant-mesh transmission (road ranger or crashbox).

How much does it cost to get a Mr licence in NSW?

For your NSW MR Licence, $ 990.00 click here to view prices.

What licence do you need to drive a bus in NSW?

The first document required to be qualified to drive a bus is the Heavy Vehicle Licence. Most route buses only have two axles, one at the front that steers the bus, and one at the back that drives it. A bus like this (that is over 8 Tonne GVM) requires at least a Medium Rigid (MR) licence.

How much does it cost to get a Mr Licence in NSW?

What is the largest van you can drive on a car licence?

If you have a full driving licence you can drive any van up to 3.5 tonnes. If you want to drive anything bigger such as 7.5 tonnes vans, you may need to take an extra test if you passed your driving test after 1 January 1997.

What does B mean on license?

In both circumstances the licence will be endorsed with a condition ‘B’: “may only drive a heavy vehicle fitted with an automatic or synchromesh gear box”. This condition applies to licence classes MR, HR, HC and MC. It does not apply to licence classes C or LR.

What can I drive with a Mr Licence NSW?

MR licence – MR (medium rigid) licences let you drive rigid vehicles with 2 axles and a GVM of more than 8 tonnes. You cannot tow trailers of more than 9 tonnes. HR licence – HR (heavy rigid) licences let you drive vehicles with 3 or more axles and a GVM of more than 8 tonnes.

How to get a new driver’s licence in NSW?

NSW driver licence. 1 Apply. Apply for a modified driver licence. Apply for a combined driver licence and boat licence. Apply for a driver licence with an interlock 2 Renew, replace or reissue. 3 Change or cancel. 4 Transfer. 5 Other tools and services.

How to get a heavy vehicle licence in NSW?

Then, depending on your location, you can either pay for a heavy vehicle competency based assessment (HVCBA) from a Registered Training Organisation or pay and book the Transport for NSW (TfNSW) heavy vehicle driving test. After completing the HVCBA or passing the driving test, you then return to a service centre for the licence.

What kind of licence do you need to drive a truck?

You’ll need an unrestricted, state-issued drivers’ licence for a period of time before progressing to a licence class that will allow you to drive a truck. Obtain a driver’s licence from the licencing authority in your state. Establish a good driving record,and decide what class of vehicle you would like to operate.

How to become a truck driver in Australia?

How to become a Truck Driver 1 Obtain a driver’s licence from the licencing authority in your state. 2 Establish a good driving record,and decide what class of vehicle you would like to operate. 3 You can complete a Certificate III in Driving Operations (TLI31216) through TAFE or a local private institution.