How do I use my British Gas WR1?

Push ‘overide’ button on the receiver once, the green LED should come on. Push button 1 followed by 2 and hold them both depressed together Red LED will flash for 2 secs then go out (learn mode) Release both buttons Red and Green LED should now both be on.

How do you set a British Gas RC1 thermostat?

On the ‘learn mode’ buttons 1&2- Press and hold button 1 then 2 and hold them both down together. The red light should flash quickly for a couple of seconds and then go out, release both buttons, red & green lights should now be lit. Hold the RC1 in your hand and stand away from the WR1 but still be able to see it.

How does a British Gas thermostat work?

Setting the temperature Hive Active Heating thermostats monitor the target temperature that you want to achieve, and the actual temperature that the thermostat is sensing. This means your heating won’t turn on if it’s already warm enough in your home – helping you use less energy and save money.

How do I turn on my Smartlink thermostat?

To switch ON the thermostat press the + and – simultaneously for 5 seconds until the OFF disappears. 3. Press + or – buttons to adjust temperature and press to start holiday count down time. Alternatively after 10 seconds the temperature will stop flashing and holiday count down time will start.

How do I turn on my British Gas smart meter?

Restore my gas supply using my meter

1. Ensure that all gas appliances are switched off.
2. Press button A on your gas meter to wake the screen.
3. Press B on your gas meter.
4. Press and hold A until you hear the supply come on.

How do I know if my central heating thermostat is working?

The most common signs of a broken thermostat are:

1. Thermostat display is off or is non-responsive.
2. Turning on the heat or AC does nothing.
3. The heat or AC will come on, but either stays on nonstop or cuts out before the temperature setting is reached.

How to check British Gas WR1 wireless system?

Still not working……………..new stat time. 1. Turn off the power supply to the Digistat SCR (receiver unit) and leave for 5 seconds. 2. Turn on power to SCR unit and check red light is on. 3. Press override button No.2 and check the green light comes on and boiler fires. 4. Press & hold down button No.1 (Keep depressed), then

How do I Turn On my British Gas wireless thermostat?

1. Make sure both battery compartments are out on the ‘Wireless 2. Check that the receiver red LED is on 3. Push ‘overide’ button on the receiver once 4. Push button 1 followed by 2 and hold them both depressed together 5. Release both buttons 6. Take the wireless display and hold it within sight of the receiver 7.

How do you turn on a British Gas Boiler?

Press override button No.2 and check the green light comes on and boiler fires. 4. Press & hold down button No.1 (Keep depressed), then press No.2 and keep depressed. {The Red LED light will flash 5. Now release both the buttons – {the two LED lights should 6. Get the Digistat+2RF/+3RF unit and stand two metres away

Why is my British Gas wireless receiver flashing?

Wireless receiver continuely flashing. Pressure on the worcester went down to 0. We have re-pressured the boiler to 1.5 but we cant get the receiver to stop. It sounds like you need to pair them up again, is it the rf1 and scr receiver by any chance?