What is NanoBeam used for?

The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

What is Access Point PtP?

Point-to-Point (PtP): Connects two locations, usually at a distance of multiple km, essentially forming an Ethernet bridge. Point-to-Multipoint links (PtMP): Connects three or more locations, using one Base Station (or Access Point) and multiple CPE devices (Stations) connected to the Access Point.

How do I reset my NanoBeam AC?

Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the NanoBeam is already powered on. Alternatively, the NanoBeam may be reset remotely via a Reset button located on the bottom of the Gigabit PoE Adapter.

What is Nano beam?

The NanoBeam M is the latest generation of Ubiquiti Networks airMAX CPE for customer locations. It’s extremely versatile and cost-effective to deploy the NanoBeam, which provides increased performance from its faster processor and innovative mechanical design at a low cost.

What does airMAX quality mean?

As the Definitions say, Airmax Quality is an indication of the quality of the connection – ie the signal strength being recieved and sent. Airmax Capacity is an indication of the data rate, so in the scenario mentioned the maximum speed in the system will be 150/150.

What is airOS?

airOS is an advanced operating system capable of powerful wireless and routing features, built upon a simple and intuitive user interface foundation. This User Guide describes the airOS operating system version 5.6, which is integrated into all M Series products provided by Ubiquiti Networks.

How do I set Ubiquiti device to point to point?

User Tips

1. Select the correct cable. Use Ubiquiti ToughCable Pro shielded twisted pair data cable between your Power over Ethernet adapter and your radio.
2. Secure the radios. Modify the default administration account name and password now.
3. Secure the wireless signal. Encrypt the wireless connection.

What is a PtP wireless bridge?

In Wi-Fi networking, a point-to-point wireless bridge lets users wirelessly connect two or more locations together. This bridge enables users to share an Internet connection between two or more locations and to share files and other types of data across the network.

What is PtP Internet?

A Point to Point Connection is a private data connection securely connecting two or more locations for private data services. A point to point connection is a closed network data transport service which does not traverse the public Internet and is inherently secure with no data encryption needed.

Which is PTP link uses a nanobeam AC?

PtP Link Use a NanoBeam ac on each side of a PtP link. Overview Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the NanoBeam® ac. Improved Noise Immunity The NanoBeam ac directs RF energy in a tighter beamwidth.

Which is the nanobeam 5AC Gen 2 CPE device?

The NanoBeam 5AC Gen 2 used as a CPE device for each client in an airMAX PtMP network. PtP Link Use a NanoBeam 5AC Gen 2 on each side of a PtP link. Overview Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the NanoBeam® 5AC Gen 2. Improved Noise Immunity

How is the nanobeam AC used in Airmax?

The NanoBeam ac used as a CPE device for each client in an airMAX PtMP network. Use a NanoBeam ac on each side of a PtP link. Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the NanoBeam® ac.

What does the Ubiquiti nanobeam AC engine do?

The NanoBeam ® AC features enhanced protection against ESD events. Ubiquiti’s airMAX ® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.