How do I access my hitron modem settings?

Login Instructions

1. In the address bar, type in the following: 192.168. 0.1 and press the enter key on your keyboard.
2. You will be presented with a Hitron login page.
3. Login with your credentials: Hitron CGNM-2250. Username: cusadmin.
4. Select the Login button.

What do the symbols on my hitron modem mean?

*The Ethernet LAN ports on the back of modem will indicate maximum speed of Ethernet connection based on capabilities of the connected device: Yellow = 1000 Mbps (gigabit Ethernet) Green = 10/100 Mbps.

How do I change my hitron WIFI password?

Changing the wireless network password

1. Enter 192.168.
2. Log in with the following information:
3. From the home page, select Manage Wireless.
4. Select the 2.4G, 5G, or Guest network from the top of the page.
5. Under the Multiple SSID Settings, next to Passphrase, enter a new network password.
6. Save your changes.

Why can’t I log into my hitron router?

You could try a hard reset on the device (hold the reset in for a good 10+ seconds). Or you can call into tech support, they should be able to log in via their login into the device, and reset the password for you.

How do I reset my hitron modem?

How to Reset your Hitron CGN2 Modem

1. Locate the Reset button on the back of the modem.
2. Press and hold the Reset button for 10 seconds.
3. After 10 seconds, release the button. The modem should restart and the lights will flash.
4. One the modem is finished restarting and is online the settings will be back to default.

How do you reset a hitron modem?

Is hitron CGNM 2250 a router?

Hitron Docsis 3.0 Intel Puma 6-MG 24×8 w/ 3×3 802.11n + 802.11ac dual band and MoCA 2.0 Speeds up to 960Mbps Wireless Gateway Modem Router CGNM-2250.

What is the default password for hitron modem?

Hitron router login normally has a default username “cusadmin“, and the default password “password“. Its default IP address is 192.168. 0.1. These Hitron credentials are needed when doing a login to the Hitron router’s web interface to change any settings.

How do I setup my modem and router?

Connect the router and the modem with an Ethernet cable . Most routers come packaged with a short Ethernet cable that you can use for this. Connect the modem to the WAN / Internet Port on your router. It is usually offset, and may be a different color from the LAN Ports.

How to connect a modem as a router?

Part 1 of 3: Setting Up The First Router Connect the modem to the first router. Use an Ethernet cable to connect to the WAN port of a router to the WAN/Internet port of the high-speed modem. Connect Router 1 to a computer. Use an Ethernet cable to connect from one of Router 1’s LAN ports to a computer’s Ethernet port. Turn on the modem and Router 1. Open a web browser.

Can I do modem to switch to router?

switch and wireless router. Unplug any Ethernet cables that are plugged into any of them.