Users' questions

Can you make a tennis grip smaller?

Can you make a tennis grip smaller?

If the old grip is a cushion grip, install a thinner replacement grip. This may reduce the grip size just enough for your needs. Remove the grip and install one or two thin overwraps onto the bare handle. This makes the grip significantly smaller but you lose the cushioning you get from a replacement grip.

How big should my tennis grip be?

The main rule with grip size is that you want a handle big enough so that there is some space between the tips of your fingers and your hand (like the image on the left). If your fingers go all the way around the handle and run back into your hand (like the image on the right), you need a larger grip size.

What grip size do pro tennis players use?

Nadal uses a 4 ¼ inch grip, while Federer uses a 4 3/8 inch grip. Both professional players use overgrip, which does increase the grip size by about a 1/16 inch, but by the end of a match, this width has gone back down due to wear. Both players claim that using a smaller grip increases the power of a wrist snap shot.

What is the biggest tennis grip size?

Manufactured tennis racquet grip sizes range from less than 4” for juniors to 4 7/8” for the largest adult hands. This might not seem like much of a range, but the difference even an eighth of an inch makes is surprising.

How thick is a tennis replacement grip?

Replacement grips vary in thickness, and that’s usually according to type. While synthetic grips may range from 1.19 mm to 2.10 mm thick, the leather grips are likely to be around 1.42mm to 1.50mm thick. In most cases, the thicker grips provide more cushioning and, of course, better absorption of sweat.

Does grip size matter tennis?

The right grip size makes a huge difference in how a racquet performs. If there is space between your finger and palm, the grip is too big. A too-small grip requires more muscle strength to keep the racquet from twisting in your hand. Prolonged use of a grip that’s too small can contribute to tennis elbow problems.

What is grip size 2 in tennis?

Grip size conversion table

European Grip size US Grip size in inches
0 (L0 or G0) 4 inches
1 (L1 or G1) 4 1/8 inches
2 (L2 or G2) 4 1/4 inches
3 (L3 or G3) 4 3/8 inches

What size tennis grip does Nadal use?

L2 grip
What Size Grip Does Nadal Use? Nadal uses an L2 grip size, and although he adds an overgrip to his racquet, this is still relatively small for a guy who stands at 6ft tall.

What grip size does Serena Williams use?

4 5/8
Serena’s Wilson Blade SW102 Specification

Head Size 102 in2 / 658.06 cm2
Composition Countervail/Graphite
Grip Size 4 5/8 (L5)
Grip Type Wilson Pro Performance
String Pattern 18 Mains / 19 Crosses

How much grip size does an overgrip add?

A typical overgrip will increase a grip by 1/16 inch. You can also increase grip size using a heat-shrink sleeve. One heat shrink sleeve will increase grip size by 1/8 inch.

What happens if you play tennis with the wrong grip size?

Playing tennis with the wrong grip size can cause the racket to twist in your hand, making it harder to hold or leading to arm problems. You have a few options if your handle is too large and needs to be reduced. Handles made of wood or foam can be reduced by carefully shaving off a small amount of material.

How big is a tennis racquet grip in inches?

Within that range, there are seven available grip sizes, which start at 4 inches or a size zero and increase by 1/8 inch for each size up to 4 3/4 inches for a size six. Depending on which country you live in, you may find the sizing of the racquet grip expressed differently, so we’ve provided a chart below.

How to measure your tennis Forehand grip size?

Two easy ways to measure your grip size 1 Holding an eastern forehand grip (the palm is placed against the same bevel as the string face), you should be able… 2 If you don’t have a racquet handy, you can also measure your grip size using a ruler. With your hand open and fingers… More

What’s the best way to increase grip size?

If you’re between grip sizes, go with the smaller size and add an overgrip to arrive at the ideal fit. A typical overgrip will increase a grip by 1/16 inch. You can also increase grip size using a heat-shrink sleeve. One heat shrink sleeve will increase grip size by 1/8 inch.