What is a Maxitrol regulator used for?

325 series regulators are used for residential, commercial, and industrial applications. The 325 series features a high leverage linkage assembly to deliver positive dead-end lockup. The regulators are capable of precise regulation from full flow down to pilot flow.

What is the correct PSI for the low pressure regulator?

Natural gas pressures in the building gas piping between the gas meter and the appliance regulator is typically about 7.5 to 8″ wc (about 0.27-0.29 psi) and needs to be at least 0.25 psi to meet the appliance regulator’s output requirements.

What pressure should the regulator be set to?

In some cases, your pressure regulator is set too low and reduces the water pressure too much. The factory setting on a pressure regulator is normally between 45 to 55 psi. However, you may need pressure regulation between 40 and 70 psi to have proper water pressure throughout your home.

Can a Maxitrol regulator be installed outside?

The New Line Pressure Regulator Standard – ANSI Z21.80 Vent limiters are designed for use indoors and spaces where limiting the amount of gas escapement due to diaphragm failure is critical. Vent limiters should not be used outdoors if they are exposed to the environment.

Can a regulator increase pressure?

With most single-stage regulator regulators, except those that use a pressure compensated design, a large drop in inlet pressure will cause a slight increase in outlet pressure.

What PSI is a standard propane regulator?

between 100 and 200 psi
Generally, propane pressure should be between 100 and 200 psi ensures that the liquid propane gas remains in a liquid state.

How many psi is a low pressure propane regulator?

The Hot Max low pressure propane regulator is great for use with standard propane and natural gas appliances. This product offers 1/2 PSI Regulator for use on gas grills, heaters, smokers and much more.

Where would a line pressure regulator be located?

The pressure regulator is generally located at the point where the local supply line connects to your home, just after your home’s main shutoff point. This way, whenever you want to repair or replace the regulator, you’ll simply turn off the main valve.

Can you install a gas regulator vertically?

The appliance regulators can usually be installed in any direction except upside down (with the cap pointed downward). If the intake manifold pipe on the appliance is vertical, pointing down wards, installation of the regulator in the vertical position is acceptable.

What kind of pressure regulator does Maxitrol use?

Maxitrol’s 325‑L Series line pressure regulators are for 2 psi piping systems. 325 series regulators are used for residential, commercial, and indus­trial applications. The 325 series features a high leverage linkage assembly to deliver positive dead-end lockup.

When did Maxitrol come out with RV camping?

For this retro­spect we go back to Maxitrol Catalog #57 from 1957 … Go Camping with Maxitrol’s CV200 (and family and friends, of course!) With the onset of the COVID-19 virus, RV camping has enjoyed a tremendous boost in popularity. It’s a fun, natural way to social distance … Everyone knows: Happy chickens lay more (Easter) eggs.

What are the New Directions for regulator sizing?

New Directions: please read. You do not have to fill in all fields. The more fields you use the more accurate your results. Results dynamically change as you move from field to field. Start with the basic information from the top, down. Use the Advanced options for specific results. Please use decimals when entering fractions.