How do you level an uneven yard?

STEPS TO LEVEL OUT AN UNEVEN LAWN

1. After mixing your topdressing, wheel your preferred sand-to-compost topdressing over to the areas of your lawn that need leveling.
2. Use a shovel to spread the mix in small piles on and around the uneven areas.
3. Use the backside of a steel garden rake to even out the topdressing.

Can you level a yard by yourself?

If your ground is relatively level, gently sloped, and has no major impediments like huge boulders, you probably can grade your lawn yourself. The tools you need for soil grading are simple. A long-handled, steel-headed rake is your next tool to buy or rent from a local rental yard.

How can I level my yard cheaply?

Fill Dirt. If your land has only a few low spots in it, adding some fill dirt is a quick and easy fix. Use a lawn-leveling mix from your local garden center or mix sand with garden soil at a 1-to-1 ratio. Load up a wheelbarrow with the fill dirt mixture and shovel a 1/2-inch layer into the depressions.

Can you level out a sloped backyard?

If you measure a drop from 3 inches to 2 feet, you may be able to do the leveling yourself. However, if the drop is greater than that, or it slopes upward, it is recommended that you hire a professional to grade the yard. For very steep slopes you may consider planting ground covers or building terraces.

How hard is it to level a yard?

In reality, leveling an existing yard is not that difficult a job. Many people believe that leveling a yard is a very difficult task, and often end up procrastinating on the task or calling experts and wasting a substantial amount of money. In reality, leveling an existing yard is not that difficult a job.

What can I do with an uneven backyard?

10 Lush Landscaping Ideas for a Hilly Backyard

1. Break Out in Tiers. 1/11.
2. Build Some Stairs. 2/11.
3. Make a Natural Staircase. 3/11.
4. Design a Waterfall. 4/11.
5. Lay a Winding Path. 5/11.
6. Erect a Retaining Wall. 6/11.
7. Cultivate a Rock Garden. 7/11.
8. Devise a Destination Fire Pit. 8/11.

How do I level my yard without killing the grass?

How to Level Your Yard Without Killing the Grass

1. Topdressing with a Leveling Mix. When you experience widespread unevenness that does not run deep, you can use a thin layer of leveling mix made up of compost, sand and soil to level the spots.
2. Cutting Out a Patch of the Turf.
3. Gently Compacting the Soil.

What is the best way to level a bumpy lawn?

These are the basic steps:

1. Mow the lawn at the lowest setting possible;
2. De-thatch the lawn with a garden rake or de-thatcher;
3. In a wheelbarrow, mix up a batch of leveling mix.
4. Apply scoops of soil mix to low areas of the lawn using a shovel;
5. Rake the topdressing to spread it out evenly.

How much does it cost to level a sloped backyard?

Leveling a slope costs between $1 and $15 per cubic yard of dirt. Basic lawn re-sloping to prevent erosion and fix drainage averages at $1,900 for most homeowners. Leveling a slope, a process called cut and fill, adds to the price because the job will require more labor.

How do you fix a sloping yard?

10 Solutions for Sloping Yards

1. Rise above it. Constructing a deck over a steep downward slope affords level space for entertaining and great views of a garden.
2. Build a banked border.
3. Design the terraces around different themes.
4. Plant a living mural.
5. Walk on the wild side.
6. Add a rail.
7. Create zones.
8. Lay a feature path.

What is the best way to level a yard?

Excavate soil from the high side of the yard and pile it in on the low side. The goal is to use the excavated soil on an adjacent area downhill to create a level terrace — this is known as the “cut-and-fill” method. Spread the excavated soil with a hard metal rake to make a smooth, level surface.

What is the best dirt to level yard?

The Good Dirt. When adding soil to a lawn to make it level and even, or to help heal damaged spots, don’t use any old dirt. For the best results, mix topsoil or loam with sharp sand and peat, creating an ideal texture.

How do you level a backyard?

Lay an 8-foot-long 2-by-4 flat on the ground at the top of the slope. Position the board so that its length is running down the slope, leaving one end even with the slope’s top horizontal edge. Place a level on top of the board and lift the lower end of the board until the level indicates that the board is level.