How do I program my Somfy remote?

To enable user mode, you need your Somfy remote and a paperclip or similar device. With the paperclip, press and hold the programming button on the back of the transmitter until the window covering jogs. The window covering is now in user mode.

How do you program a multi channel Somfy remote?

Press and hold the programming button of that transmitter until the shade jogs. Select the transmitter (single channel) or the channel, (1-5) of a multi-channel transmitter, to be added or deleted. Press and hold the programming button of that transmitter until the shade jogs. A jog is a brief up and down motion.

How do you program a somfy rechargeable motor?

1) Press and hold the motor head programming button until the driven product briefly moves Up and Down. 2) Briefly press the motor head programming button, the driven product briefly moves Up and Down twice. “Sleeping mode” is activated.

What is the My button on Somfy remote?

What is the “My Button”? The “My Button” on Somfy remote controls has two purposes. It is a stop button when the shades are in motion. But for programming purposes, it is what I call a favorite position button.

How do I get rid of Somfy remote?

To remove a control, start with a remote you wish to keep and press the PROGRAMMING BUTTON on the back of that remote. Then take the remote you wish to delete and press the PROGRAMMING BUTTON on its back. The remote is now removed from the motor’s memory.

How do you test a Somfy motor?

How to Test Whether Your Motor Is in Factory Settings

1. Press the up and down button simultaneously.
2. The motor will jog once (it moves up and down).
3. Check the power source connection to check if all blinds or shutters are working.
4. Do a reset.

How do you program a roller blind remote?

Press and hold the “Prog” button for one second and the blind will beep and shunt once. On the remote control press the ‘Down’ button, and the motor will shunt once again. You have successfully programmed the blind and remote.

How do I reset my Somfy remote?

Procedure:

1. Start with having power applied to the motor.
2. Remove the power for 2 seconds.
3. Re-apply power for 10 seconds.
4. Remove the power for 2 seconds.
5. Re-apply power. The shade will begin to move.
6. When it stops moving, press and hold the programming button on the back of the remote until the treatment jogs twice.

How do I reset a channel on Somfy remote?

To delete, press and hold the programming button on the remote or channel you wish to delete until the window covering jogs. That’s it! You’ve successfully deleted a control or channel!

What can I do with a Somfy RTS motor?

Somfy manufactures a variety of products for interior window coverings, awnings and rolling shutters. This video will detail the steps involved in programming the limits for any Radio Technology Somfy (RTS) motor, whether it be battery powered, plug-in, or hard-wired. The remote that we’ll be using is the Telis single channel RTS pure.

How to change the battery on a Somfy remote control?

PLEASE CONTACT SOMFY AT [email protected] OR YOUR LOCAL DEALER AT www.somfysystems.com/locatedealer. REPLACING THE BATTERY 1. Using a small screwdriver loosen the screws on the reverse side of the remote control and remove the back cover. 2. Replace the battery with one 2430 Lithium 3V battery. PROGRAMMING – SETTING A FAVORITE POSITION (MY) 2.

Where is the programming button on a Somfy RTS?

BUTTON located at the side of the motor for approximately 12 seconds, during which the motor will jog 3 separate times. All remotes and limits will be erased (motor is now reset to factory mode). Motor limits will need to be reestablished. When the motor stops, press and hold the programming button on your handheld or

Do you need a copy of the Somfy instructions?

Copies of the Somfy instructions are also provided for your reference. Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure to do so can result in damage to the motor and or the shade. Be prepared to stop the shade during programming.