How do I clear my F21 code on my Maytag washer?
How do I clear my F21 code on my Maytag washer?
What is an F21 or F02 Error Code on my Maytag Front Load Washer? These error codes indicate that drain times are longer than expected….Removing the Error
- Unplug the washer or disconnect the power for one minute.
- Plug in the washer or reconnect the power.
- Re-select the cycle and press Start.
Why does my washer keep saying F21?
If you see error code F21 on your Whirlpool washing machine, this refers to a water drain problem. The washer won’t be able to finish the cycle and your laundry will be wet. This error code means draining is taking too long, and something is wrong with the water pumping.
How do I fix error code F21?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
How do I reset my Maytag 5000 washer?
How to Reset a Maytag Washer
- Press the “Power/Cancel” button.
- Push the appropriate button to choose a new cycle.
- Press “Start/Pause.” You have now reset your Maytag washer.
How do you reset the code on a Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does F mean on my Maytag washer?
drain cycle
The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. Press PAUSE/CANCEL twice to clear the display. If the error code returns, check to be sure the drain hose isn’t clogged or kinked.
What does the code F21 mean on a Maytag washer?
Long Drain Error
Error Code F21: Long Drain Error (If drain time takes longer than 8 minutes, the water valves will turn off.) Symptoms: The washing machine stops mid cycle. The door stays locked. The washing machine won’t drain the water out.
Why does my washer keep saying F?
The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
How do you reset the F20 code on a Maytag washer?
What is an F20 or FH Error Code on my Maytag Front Load Washer? An F20 or FH error code indicates a water supply problem….Removing the Error
- Unplug the washer or disconnect the power for one minute.
- Plug in the washer or reconnect the power.
- Re-select the cycle and press Start.
What are the codes for a Maytag washer?
Error Codes in my Maytag Front Load Washer
| Error Code | Error |
|---|---|
| Sud or Sd | There are too many suds in the washing machine. |
| F5 E2 | The door is not locking properly. |
| F7 E1 | Indicates a motor speed sensing error, |
| F8 E1 or LO FL | The washer is sensing a low flow of water. |
What does F21 mean on a Maytag front load washer?
“Maytag front load washer with code f21?” Sounds familiar? You are not alone. If you ever tried to find possible causes and actions to the Error Code F21 and other error codes on your Maytag washer, you’ve come to the right place.
What to do if you get an error code on your Maytag washer?
Unplug the washer for two minutes to reset the machine. Once the code is removed, restart the cycle by pressing the POWER button one time. If Code Persists, contact service professional. Tell your technician the error code # and to check the pump drive, main relays and CCU board.
Why is my Maytag washer not draining properly?
This can be caused by too much detergent, or because HE detergent is not being used. Another cause could be due to the pump not draining the water correctly, which is directly related to error code ‘F21’. The ‘F21’ code means that the draining cycle lasts longer than eight minutes.
What to do if your washer says F21 or F02?
If Pause/Cancel does not work, perform the following: Unplug the washer or disconnect the power for one minute. Plug in the washer or reconnect the power. Re-select the cycle and press Start. NOTE: If the error remains on the display, and all of the other conditions above have been checked, call for service.