Why is my Paslode finish nailer not firing?

Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The nailer needs cleaned – especially if it has been used a lot without regular cleaning!

What causes a nail gun to not fire?

Jams are typically caused when nails feed incorrectly and wedge against the driver blade, preventing the tool from cycling. Jams are the most common cause of a nailer not firing. For safety, first disconnect the tool from the air supply, retract the feeder mechanism, and remove any excess fasteners from the magazine.

How do I know if my paslode battery is bad?

If the battery is damaged, the red indicator light on charger does not flash when you try to charge the battery. If the battery isn’t accepting a charge when you mount it on the charger, you must replace it. A new battery doesn’t come fully charged, so charge it before inserting it into the Paslode.

Do Paslode fuel cells go bad?

Paslode fuel cells have a long shelf life with the inbuilt design and metering valve system enabling the product to be stored for about 27 months.

How do you remove the spark plug from a Paslode?

Remove the cover to reveal the wiring on the rear of the fan. Locate the thick red wire and pull up on the rubber boot at its top end to disengage it from the spark plug. Twist the spark plug one half turn counterclockwise and pull out to remove it. Insert a new spark plug, turning it clockwise to lock it in place.

Why is my battery tender flashing red and green?

If you connected the battery wrong, it will blink red then green alternating colors. This red-green blinking means you hooked up the battery “polarity” wrong.

How do I know if my Paslode battery is bad?

What to do if your Paslode im250 II doesnt fire?

Also check that your gas has pressure, that it’s in date, that the cap on the gas cannister is properly snapped on and that the top of the gas container housing is properly closed If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Why is my Paslode nail gun not firing?

The nail gun isn’t firing or is firing intermittently. Misfiring is the most common repair that we conduct. Possible causes for a Paslode nail gun not firing are: The nailer needs cleaned – especially if it has been used a lot without regular cleaning!

Is there a Paslode that won’t fire?

Discussion in ‘ Tools and Materials ‘ started by danpompey, 14 Feb 2008 . Any one know about paslodes. Mine wont fire at all. Iv new gas and battery but i have nothing??????????????? do you have the right cartridge yellow or red depending on your color in gun, also when did you last charge you battery.

Why does my Paslode Nailer make a poof sound?

If you have a cordless nailed, it may need to be cleaned. Remove the fuel and the battery and clear any jammed nails from the nailer if the makes a “Poof” sound when you fire it. Check to make sure the driver blade is in the down position. This is necessary or the tool will not fire.