Can you sand down a guitar neck to make it thinner?

We ‘ve got the solution! You can make that fat neck a lot thinner and much more playable! Once you have sanded down the back of the neck and shaped it to the most suitable profile, you have to eliminate any harsh spots using fine, high-grit sandpaper by hand. The back of the headstock area could be painted as well.

What do I put on my guitar neck after sanding?

Sealing the wood will eliminate that problem, but obviously certain products will put you right back where you started with a sticky finish. I’ve seen guys use anything from Tru Oil for gunstocks to 3-in-1 oil to Linseed Oil to Lemon Oil.

Can a guitar neck be shaved down?

After the neck shave, it will then play and feel better for that player. If your neck thickness is an impediment to your playing, then guitar neck shaving is the right decision for you. We’ll shave your guitar neck to help you become more comfortable with your guitar and finally, play better.

What guitars have the thinnest necks?

Some of the best electric guitars for small hands, i.e., with the thinnest necks include Fender’s Kurt Cobain Mustang, Jaguar, and Vibe Stratocaster. Other excellent options include The Gibson or Epiphone Les Paul Special VE, the Daisy Rock Venus, Ibanez GRGM21 Mikro ¾, or Stagg S300 ¾ (source).

How thick should guitar neck be?

There are three basic groupings in terms of thicknesses: Thin: any neck with a 17-19mm thickness at the nut. Medium: any neck with a 20-22mm thickness at the nut. Thick: any neck with a 23mm+ thickness at the nut.

Should I sand the back of my guitar neck?

Sanding down the rear of your neck will eventually wear it through when you have to repeat the process, whereas adding a new layer is a safer option, but it is also a little trickier. The lacquer on guitars is often tough but some, like nitrocellulose, are delicate and may well require you to adjust your technique.

Why do some guitars feel easier to play?

Electric guitars are easiest to play. They have a narrow neck, which makes playing barre chords much easier and much more comfortable. Also, they have thinner strings and lower action height. Classical guitars have wide neck, wider than necks of acoustic or electric guitars.

Does a guitar neck need to be finished?

**If you will be finishing a Raw Maple neck, you must apply a finish to it or else they will be warp over the years and may do that quicker in damp and humid climates. If you will be using a rosewood or ebony neck, be sure to use Lemon oil or Mineral oil on it to keep the face wood hydrated.

What’s the best way to sand a guitar neck?

To do a nice tidy job it’s best to take the neck off your guitar (if possible, don’t saw off your SG neck). The point is to create a nice edge to stop against. In the case of this Fender Marauder we’ll sand down the whole heel of the neck. A PH2 screwdriver will do the job of taking it off.

What does thin neck mean on a guitar?

I’m talking about how wide the neck is. The thinner the neck, the easier the guitar is to play (especially if you have smaller hands or just less want something that is super easy to fret) Neck Thin-ness is typically specified by using the width of the neck at the nut.

What kind of fretboard is in a thin neck guitar?

The neck is constructed from hard rock maple, and it’s topped with an ebony fretboard that is home to 20 frets. It has a thin neck, measuring 1-11/16” at the nut. That’s on the lower end of the scale, and many players prefer a thinner profile.

How can I Make my Telecaster neck thinner?

You probably will need to adjust the truss rod when you are done, but probably not much. The line from the carve by the heel to the carve by the headstock is a straight line along the length of the neck. Get a cheap caliper and use it to compare the thickness of the neck to what you want. Also check the depth along the neck.

https://www.youtube.com/watch?v=jsIXoHSWY-Q