How long does Cabot Australian timber oil last?
How long does Cabot Australian timber oil last?
UV rays (sunlight) and moisture (rain/snow/dew) are wood’s natural enemies, so minimize exposure. Evaluate finish each spring and maintain as needed. Finish durability depends upon weather, wear and other local conditions, but finish typically lasts 1–3 years on decks and 2–4 years on siding and fences.
How much does a gallon of Cabot timber oil cover?
Coverage. Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 3400 series covers approximately 400-600 square feet per gallon, 19400 series covers approximately 250-350 square feet per gallon.
Is Cabot Australian Timber Oil Oil based?
for decks and outdoor furniture. Penetrates deep into woods to accentuate natural wood depth and patina. Recommended for use on: exterior wood decks, siding, railing, steps and fences as well as exterior furniture. …
Is Cabot Australian Timber Oil waterproof?
Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure tung oil for color depth and water repellency, it delivers three-way oil protection.
What kind of oil does Cabot Stain use?
Australian Timber Oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina.
What are the specifications for Cabot Australian timber oil?
Specifications Maximum Application Temp (Degrees F) 90.00 Maximum Working Temperature (Celsius) 32.22 Maximum Working Temperature (Fahrenheit) 90.00 Mildew Resistant Yes Minimum Application Temp (Degrees F) 50.00
How does Australian timber oil work on wood?
Australian Timber Oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina.
How to apply Cabot Oil to outdoor furniture?
To avoid lap marks, start at one edge and follow through to the end of the boards. Apply Cabot Australian Timber Oil for Decks and Outdoor Furniture to small sections at a time, 2-3 boards at a time. Product that does not penetrate must be removed or rubbed into the boards parallel to the wood grain.