Why does my Onkyo receiver have no sound?

Incorrect settings on your Onkyo receiver can result in no sound. The digital input signal should be set to “Auto.” Select the correct digital input source. Unplug headphones from the receiver when you are trying to use your system with the external speakers. Adjust the volume controls so you can hear sound.

How do you reset Onkyo TX ds777?

first press the AUDIO ADJUSTMENT button to select the item and then rotate the SMART SCAN CONTROLLER to the factory-set default. Press the OSD MENU button. 2. Default: Select “Default” to reset each item in the similar manner.

Why does my surround sound have no sound?

Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. Check each speaker to make sure they are properly connected to the A/V receiver.

How do I test my Onkyo receiver speakers?

To setup your receiver to output the test tone from the speakers, press the Setup button and select Speakers>Manual Setup>Level>Test Tone Star. You can now select and adjust the speakers’ audio level using the “UP, DWN and SIDES arrows” buttons on your remote control.

How do I play sound through my Onkyo receiver?

Plug the red and white RCA cables into the “Audio Out” ports on the back of the television. However, if you are using an HD TV, connect a HDMI cable into an available HDMI port on the TV set. Connect the other end of the RCA cables into the “Audio In” ports on the back of the Onkyo receiver.

How do I reset my Onkyo receiver sr607?

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VCR/DVR] button, press the [ON/STANDBY] button. “Clear” will appear on the display and the AV receiver will enter Standby mode. Note that resetting the AV receiver will delete your radio presets and custom settings.

Why does my home radio have power but no sound?

Silent stereos are usually caused by low power, a wrong source selection, disconnected or faulty speaker wires, broken speakers, or a malfunctioning source component. Remember to always turn off the power to the system and components before connecting or disconnecting cables and wires.

Why is my sound system not working?

Restart your computer and run the BIOS/UEFI setup menu. When doing so, specifically look at the audio settings. In BIOS, tab over to the Advanced menu and make sure that the sound card is enabled. If the prior step doesn’t work, update your BIOS and see if this fixes your sound problems.

How do I get sound on my Onkyo receiver?

Power on the Onkyo receiver. If using RCA cables press the “TV” button to begin listening to the audio from the television. However, with the HDMI connection you need to press the HDMI button, followed by the cable connection number. Once done, you can enjoy the HD audio coming from the television.

Can You Review an Onkyo tx-ds777 a / V receiver?

Onkyo TX-DS777 A/V Receiver Doing a decent review of an A/V receiver is one of the most difficult tasks in all of audio journalism. It used to present a challenge because receivers sounded somewhere between uninspiring and awful.

Are there any problems with the Onkyo receivers?

Problems With Onkyo Receivers 1 No Sound. Incorrect settings on your Onkyo receiver can result in no sound. 2 No Picture. Video connections going into your Onkyo receiver must be securely seated in the video inputs before you will see a picture. 3 Cannot Control Other Components. 4 Cannot Record.

How can I get my Onkyo headphones to work?

Unplug headphones from the receiver when you are trying to use your system with the external speakers. Press the “Muting” button on the remote control to unmute your Onkyo receiver. Check the inputs and outputs to ensure they are correctly connected to the receiver. Adjust the volume controls so you can hear sound.

How can I Unmute my Onkyo remote control?

Press the “Muting” button on the remote control to unmute your Onkyo receiver. Check the inputs and outputs to ensure they are correctly connected to the receiver. Adjust the volume controls so you can hear sound.