How much is a double check valve?

Compare with similar items

How much is a check valve?

Depending on the size of the system and how much it costs, most homeowners pay between $135 and $1,000. The device costs between $35 and $600, while labor costs between $100 and $400. You can expect to pay between $70 and $250 for a back water or check valve.

What is a double check valve used for?

A double check valve is used for fluid category 3 protection, where there is a risk of substances of low toxicity such as common disinfectants.

How long is a double check valve?

80mm long
The stopcock is 74.5 in length and the double check valve is 80mm long.

Is a double check valve the same as a backflow preventer?

A double check valve or double check assembly (DCA) is a backflow prevention device designed to protect water supplies from contamination. Secondly the closure of one valve reduces the pressure differential across the other, allowing a more reliable seal and avoiding even minor leakage.

What’s another word for double check?

What is another word for double-check?

How do I know if I have a bad check valve?

Symptoms of a Failing Check Valve For example, failing check valves will start to vibrate and even lose some internal parts when problems begin to arise. Other symptoms of check valve failure include reverse flow and excessive component wear and damage. Check valves will also emit noises as they start to break down.

Can I use a check valve instead of a backflow preventer?

A backflow preventer protects your potable water. A check valve controls flow but it is not absolute. A check valve is not an appropriate substitute for a backflow preventer.

When should a double check valve be installed?

The Double Check Valve must be installed prior to the irrigation system and after the water meter.

Can a double check valve fail?

Double check valves are called so because there are two valves inside which act as a safety feature. It’s extremely unlikely that both valves will fail. If one valve fails, the other acts to prevent backflow and contamination in the mains water supply.

Is it double check or double check?

Double-check is a transitive verb, which is a verb that takes an object. Related words are double-checks, double-checked, double-checking. Note that double-check is correctly rendered with a hyphen, though the term is also seen as two separate words, as in double check.

Where can I buy Watts double check valve?

Product can not ship to California, Vermont, and outside United States. Watts Series 007M1QT Double Check Valve 1″ (0062306)Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply.

When to use a double check valve assembly?

Designed for use in non-health hazard cross-connections and continuous pressure applications subject to backpressure or backsiphonage incidents, such as lawn sprinklers, fire sprinkler lines, commercial pools, tanks and vats, and food cookers. Have a question or two? Visit our Customer Support page to find the answers you’re looking for.

How big is the check valve on a Victaulic firelock NXT?

Victaulic FireLock™ NXT™ Series 768N 6 in. Ductile Iron Grooved Dry System Check Valve