Why are my sewing machine stitches so tight?

If the bobbin case falls several inches, the bobbin tension is too loose. If the bobbin doesn’t fall at all, the bobbin tension is too tight. There is a small screw on the side of the bobbin. Using the screwdriver in your machine tool kit, turn the screw a quarter-turn right to tighten, left to loosen.

Why is my top stitch so tight?

If the bobbin thread was incorrectly threaded, the upper thread may be too tight. If the upper thread was incorrectly threaded, the upper thread may be too loose. 4. To increase the upper tension – increase the tension setting or turn the knob to the right.

Why is my Janome sewing machine Jamming?

The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.

Why is my Janome Overlocker not stitching?

When you overlocker is not stitching right, it could be that the blades need changing. If this threading is wrong, then your overlocker will not form a chain or even a stitch. After that, check your tension settings when you start threading the machine. If they are not already set to 0 do so before threading.

How do you fix a sewing machine that keeps jamming?

This may require gently tugging at the fabric and lifting it enough that you can snip at the threads and pull the fabric free of the machine. Next, remove all the jammed thread; this may require removing the bobbin, the throat plate, and any other parts to release any jammed threads and get the machine sewing again.

Why won’t my sewing machine needle go up and down?

A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt. Replace the drive belt if it’s broken.

What width should my sewing machine be on?

A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.

How will you correct a loose top stitch when the needle thread tension is too tight?

If the tension isn’t perfect, fix it by adjusting the bobbin spring; tighter if the bobbin thread shows on the upper layer, and looser if the needle thread shows on the underlayer. Make another test seam, and examine the stitches, repeating until the stitch is balanced.

How do you lock off stitches on Janome?

All of Janome’s computerised machines have a locking stitch button, which allows you to lock off the stitches with a simple press of a button instead of reversing over the previous stitching. Decorative stitches are programmed to lock off once completed however there are two options you can choose to lock off your stitches.

Is it easy to troubleshoot a Janome Sewing Machine?

Troubleshooting your machine to keep it in good working order is relatively easy. Janome has a long history of producing quality, easy-to-use sewing machines. The company makes machines for embroidering, quilting, general sewing and serging.

Why do I get skipped stitches on my sewing machine?

Most of the time the sewing machine is giving you skipped stitches, thread breaks, not taking the bobbin thread etc. because the needle is not placed properly. Put the needle so that the flat side is to the back or as per your sewing machine manual.

Why does the upper thread keep breaking on Janome?

Improper bobbins can be too tight or loose in the bobbin case. Why does the upper thread keep breaking? The easiest first step to correct thread breakage is to snip your thread at the spool and rethread. If you have different sizes of spool caps, are you using the correct size? Threads can tangle around the spool pin and snap.