How do you fix a broken iPhone power button?

1: Hard Reset Your iPhone

1. Hold the Power button (or use AssistiveTouch) and the Home button at the same time.
2. Release both buttons when the Apple logo appears (around ten seconds).
3. When the iPhone boots up, test the Power button for normal functionality.
4. If the Power button works again, it means it was a software error.

How do you fix a broken power button?

Ways to restart your device with a damaged power button when the device is OFF.

1. Once all your charge is depleted, simply connecting your device to the charger may restart your device.
2. Try connecting to a PC or a laptop via USB cable.
3. If you have USB debugging enabled, then you can restart your device using ADB commands.

How do I turn on my iPhone 4s?

To turn iPhone on, press and hold the Sleep/Wake button until the Apple logo appears. To turn iPhone off, press and hold the Sleep/Wake button until the red slider appears, then touch and drag the slider from left to right. To lock iPhone, press the Sleep/Wake button.

Why did my power button stop working?

Reboot your phone Rebooting would help if the reason why the power button is not responding is because of any software or application glitch. When you reboot the device, it would help restart all the apps. For Android phones, rebooting can be done by pressing the home key plus volume key and power key simultaneously.

How do I turn my iPhone off if the power button is broken?

How to turn off iPhone with a broken power button

1. Open Settings.
2. Swipe down and tap General.
3. Swipe down to the bottom and tap Shut Down.

How do I know if my power button is broken?

Start by unplugging the power switch from your motherboard. 2. Take a flat head screw driver and touch it to the two pins the power switch was plugged into for 1-2 seconds. If the unit comes on then the power button is faulty, otherwise you may want to try the paper clip test on your power supply.

How do I turn on my phone if the power button is broken?

Volume Button Make sure your phone battery has enough charge for the phone to actually run. Hold down the volume down key and connect your phone via USB cable to your PC. Keep the volume button held down until you see a boot menu. Select the ‘Start’ option using your volume keys, and your phone will power on.

What do you do if your iPhone 4S won’t turn on?

Perform a force restart

1. Press and hold the Home button.
2. While holding the Home button, press and hold the Sleep/Wake button.
3. Continue holding both buttons for about 10 seconds until the Apple logo appears.

Why has my iPhone 4S stopped working?

If the phone is unresponsive, try to power on the phone by holding the power button for about 2 seconds. If this does not work, then attempt to restart the iphone by holding the power button and home button simultaneously until the Apple logo appears (~10 seconds). If the phone remains dead, try to reset the phone.

How to repair a power button on an iPhone 4S?

Remove the logic board 1 00 Phillips screws at the top, middle, and bottom left of the logic board with your #00 Phillips screwdriver. 2 There are two more screws holding the logic board in place and you’ll need to remove them with your flat head screwdriver. 3 Now you should be able to lift the logic board out of the iPhone.

What can I do if my power button on my iPad is broken?

When your iPhone or iPad’s power button is broken, you can use AssistiveTouch button to operate your iOS device. Once you enable this virtual button, you can lock your device screen, turn on and off, and take screenshots on the iOS device.

What to do if your power button on your iPhone goes Kaput?

Once you enable this virtual button, you can lock your device screen, turn on and off, and take screenshots on the iOS device. If you thought an unresponsive home button is the worst thing to happen to your iPhone, you should ask the guy whose power button just went kaput. It’s very uncommon that the power button of the iPhone/iPad breaks.

Where are the pentalobe screws on an iPhone 4S?

Power off your iPhone before beginning disassembly. Remove the two 3.6 mm Pentalobe P2 screws next to the dock connector. Be sure the driver is well-seated when removing Pentalobe screws—they are easy to strip. Push the rear panel toward the top edge of the iPhone. The panel will move about 2 mm.