What OSHA standard requires guarding of horizontal shafting that is less than seven feet from the floor?

§1910.219
OSHA standard, §1910.219(c)(2)(i) states, “All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top …

What is the OSHA standard for guarding the point of operation for machinery?

29 CFR 1910.212(a)(1) states that one or more methods of machine guarding must be used to protect operators and other employees from hazards, including those created by point of operation, in-running nip points, rotating parts, flying chips and sparks.

Do rotating barrels require guards?

A: “Revolving barrels, containers, and drums must be guarded by an enclosure interlocked with the drive mechanism, so the barrel, gun, or container cannot revolve unless the guard enclosure is in place.”

When power operated tools are designed to accommodate guards they shall be equipped with such guards when in use?

All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition. (b) Guarding. (b)(1) When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.

What is the OSHA standard for fall protection?

OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.

Which fall protection is not allowed at a leading edge?

Each employee on a walking/working surface 6 feet (1.8 m) or more above a lower level where leading edges are under construction, but who is not engaged in the leading edge work, shall be protected from falling by a guardrail system, safety net system, or personal fall arrest system.

Why is it not safe to use a machine with a guard not in place?

They must be firmly secured to the machine. The guard should ensure that no objects can fall into moving parts. A guard cannot create a hazard such as a shear point, a jagged edge, or an unfinished surface that could cause a laceration.

Do jointers require guards?

Each one of these machines has an ideal guard match. For example, jointers should be fitted with self-adjusting guards.

What are designed to accommodate guards?

Power-operated tools designed to accommodate guards must be equipped with properly functioning guards unless they impede workflow. Machines designed for a fixed location must be securely anchored to prevent walking or moving.

What are the OSHA requirements for machine guarding?

Machine safeguarding helps protect workers from preventable injuries in all three areas. The Occupational Safety and Health Administration’s (OSHA’s) requirements for machine guarding are found in 29 Code of Federal Regulations (CFR) 1910 Subpart O, Machinery and Machine Guarding as detailed below;

What are the different types of machine guarding?

Machine guarding. Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.

When do guards need to be affixed to machines?

Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself. Point of operation guarding.

Why is machine guarding important in the workplace?

Moving machine parts create workplace hazards and potential machinery-related injuries, making machine guards vitally important. Machine safeguarding can help you protect workers from preventable injuries. OSHA’s requirements for machine guarding are found in 29 CFR 1910 Subpart O, Machinery and Machine Guarding.