How do I reset my Meaco dehumidifier?

If you wish to reset the dehumidifier to its factory default settings switch the dehumidifier off using the ON/OFF button, unplug it from the mains, wait a few minutes, plug it back into the mains and then switch the unit back on using the ON/OFF button.

Can you run a dehumidifier below freezing?

Most dehumidifiers should not be operated in temperatures below 60° F, since the moisture removed from the indoor air can freeze when it condenses on the cooling coils, which can damage the unit.

Why is Meaco dehumidifier flashing?

When the dehumidifier is in normal dehumidification mode the light is on. The light will flash when the temperature in the room is below approximately 18°C to indicate that it is defrosting internally, this is not a fault, it is part of normal operation to maintain good dehumidification.

Why does my Meaco dehumidifier keep turning off?

If your dehumidifier keeps shutting off, the issue may be with the humidity control or humidistat. Having to set the control to a lower setting in order to reach the desired humidity level is a sign that the humidistat is defective and needs to be replaced.

How does a Meaco 10L dehumidifier work?

The Meaco 10L is a compressor dehumidifier which means that it extracts the moisture from the air by creating a cold surface inside the dehumidifier using refrigerant and a compressor. The fan on the dehumidifier pulls the air in from the room, over a filter, and onto the cold surface.

Which is the best meacodry dehumidifier to buy?

Featuring the latest low-noise and energy saving technology the 10 litre MeacoDry ‘ABC’ is our quietest compressor dehumidifier – awarded a Quiet Mark – making it perfect for smaller homes and flats that want superior performance without the noise of a large machine. Why choose a compressor dehumidifier?

When does a dehumidifier freeze up what temperature?

If the room temperature is lower than 40 degrees F., the dehumidifier will definitely freeze up. A clear indicator of this is an evaporator coil that is frosted up completely and evenly (see Step 5 for information on opening the unit).

What does automatic defrost on meacodry 10L do?

Automatic defrost – increases water extraction whilst saving energy when used in lower temperatures. Automatic turn-off – prevents spillage when water tank is full. We’ve added easy-to-use controls with a display showing the current room relative humidity. You can set your target relative humidity in increments of 5%.