How do you clean an ERCP scope?

3 Thoroughly brush or wipe all external surfaces of the endoscope, using a clean, lint-free cloth, brush or sponge. Pay particular attention to the air/water nozzle opening and the objective lens on the distal end of the insertion section, and ensure that all surfaces of the distal end are thoroughly cleaned.

How do you leak test Olympus endoscope?

The process of testing a scope for leaks can be broken down into five steps:

1. properly connecting the water cap and pressure tester.
2. properly pressurizing your scope for testing.
3. submerging only the bending section first.
4. submerging the entire scope.
5. flushing the channels during the pressure test.

What is endoscope leak testing?

Leak testing is a vital processing step that detects fluid invasion in an endoscope. Endoscopes that are inadequately leak tested can pose a risk for transmission of infection or injury to patients. If not detected, fluid invasion of an endoscope can damage the endoscope and increase repair costs.

What is used to sterilize endoscope?

Ethylene Oxide Ethylene oxide gas has been the standard for  sterilizing heat-sensitive items, including endoscopes.

How do you disinfect and sanitize an endoscope?

After the endoscope and all of its parts have been cleaned as described above in a disinfectant-detergent cleaning solution, and thoroughly triple-rinsed with tap water to remove the disinfectant-detergent, the rinsed endoscope should then be soaked in a high level disinfectant at the labeled exposure time and …

Which is the best cleaning combination for Olympus endoscopes?

A highly effective cleaning combination = EndoQuick + ultrasonic cleaning provides efficacious cleaning Winning Combination = Ultrasonic cleaning + EndoQuick Alkaline Detergent + Acecide-C PAA for HLD Olympus tested and approved products to provide reliable cleaning efficacy and scope longevity

What do you need to know about Olympus endoscope reprocessing?

Olympus offers an automated endoscope reprocessor and three chemicals for cleaning and reprocessing endoscopy equipment. A reprocessing documentation, workflow and asset management system. Providing endoscope protection and bacterial growth prevention.

What kind of disinfectant does Olympus use for reprocessing?

Fast-acting, room-temperature high-level disinfectant for reprocessing. A next generation software platform offering facilities centralized reprocessing record and image management through expanded connectivity of Olympus devices. The fastest, most compact Automated Endoscope Leak Tester on the market, ALT-Pro.

What is the best way to clean an endoscopy?

Manual Cleaning. Once the endoscopy equipment is in the specified cleaning area, it should be manually cleaned. Fill a basin with a freshly prepared solution of water and a medical-grade, neutral pH detergent that is low-foaming and formulated for endoscopes.