How do I connect my Fujitsu fi 6130 scanner to my computer?

Fujitsu FI-6130 setup

1. Click on the New Page icon in Volume.
2. Select Scanner Setup.
3. Select ‘Show using its ADF’ and then click ‘Select a Scanner’.
4. In the ‘New Page Entry’ window click ‘Scan’. This will show the Fujitsu scanner’s interface.
5. Click the ‘Option’ button to show the Option window.

How do I get my Fujitsu scanner to work?

Please try the following steps to establish the connection:

1. Restart your ScanSnap.
2. Connect the USB cable directly.
3. Turn-off antivirus software.
4. Use another USB port.
5. Use another USB cable.
6. Disconnect other USB devices.
7. Use ScanSnap Support Tool.
8. Delete the device driver.

How do I test my Fujitsu scanner?

1) Press the “I” side of the main power switch of the scanner. 2) Press the [Power] button on the Operator Panel. The scanner is turned ON, and the Power LED on the Operator Panel lights in green. Turn on your computer.

How do I download Paperstream capture?

Installation

1. Download “PSCL1001.exe” onto your hard drive.
2. Quit any other applications that are running on your computer.
3. Execute “PSCL1001.exe” that you downloaded in step 1.
4. Double-click “PSCSetup.exe” which is located in the PSCaptureLite folder.
5. When the installation has completed, Click.

How do I reinstall my ScanSnap S1500?

Installation Instructions

1. Turn off your ScanSnap S1500 / S1500M and do not turn it on until all software and updates are installed.
2. Create a save destination folder for the file download onto your main hard drive.
3. Download the program for installation.
4. Double-click the downloaded executable file to unzip its contents.

Why is my ScanSnap S1500 not working?

If the icon status still indicates “Not Communicating”, unplug the USB cable from the computer or ScanSnap, wait 5 seconds and reconnect the USB cable. Change and try another USB cable. Disconnect any other USB devices (printer/scanner/external hard disk, etc) and try connecting only the ScanSnap.

How do you use paper streams?

1. Run the program “PaperStream Capture”.
2. After opening the program and put the paper in, click the option “Color”.
3. To save file, click “Release”; to scan more paper, click “Add” 6.
4. The file will be saved in the “Document” folder, which can be accessed from the Desktop.

Is PaperStream capture free?

What is PaperStream Capture Software? PaperStream Capture, included FREE with Fujitsu fi Series scanners, delivers enhanced images to save time and money. Built upon PaperStream TWAIN and ISIS drivers, PaperStream Capture is a simple, front end scanning software.

What is the user manual for the Fujitsu fi-6130?

Thank you for purchasing the fi-6130 / fi-6230 Duplex Color Image Scanner. This document describes how to handle the fi-6130 / fi-6230 Duplex Color Image Scanner and basic operation methods. Before you start using the fi-6130 / fi-6230 Duplex Color Image Scanner be sure to thoroughly read this manual to ensure correct use.

Is the fi-6130 / fi-6230 image scanner operators guide?

Copyright 2007 © PFU LIMITED fi-6130 / fi-6230 Image Scanner Operator’s Guide TROUBLESHOOTING CONTENTS MAP TOP Liability BEFORE USING THIS PRODUCT, PLEASE READ THIS MANUAL CAREFULLY. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY CAN OCCUR TO USERS OR BYSTANDERS.

How to replace the pick roller on the fi-6230?

4.1 Cleaning Materials and Locations Requiring Cleaning 4.2 Cleaning the Flatbed [fi-6230 only] 4.3 Cleaning the ADF Chapter 5 REPLACING CONSUMABLES 5.1 Consumables and Replacement Cycles 5.2 How to Check and Reset the Comsumables Counters 5.3 Replacing the Brake Roller 5.4 Replacing the Pick Roller

Where can I find the Fujitsu software manual?

The manuals listed below have been updated with the latest information. For the manuals of the bundled software listed below, please refer to the respective software website.